Perforated tear-off layer for 3D printing: one-time pull-tab lids, sealed capsules, breakaway supports (STL, STEP) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/perforated-tear-off-layer/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: Xem technique. A layer of dots that the next layer bridges, used as a designed weak plane; related to tamper-evident designs that use stress concentrators and pause-and-insert containers (MakerWorld), and to support interface / contact-distance settings (Prusa, OrcaSlicer). Catalog version: 2026-10-20 Overall (mm): length 72, width 60, height 41.8 - Starting values, not tested limits: 0.2 mm layer height, dots Ø0.8 mm at 2 mm pitch, exactly one layer tall, on a layer boundary (z a multiple of 0.2). Print the test strip first and pick the pitch that holds but tears cleanly. - Smaller pitch or bigger dots = stronger seal; wider pitch tears more easily. - Load a container: pause the print at the dotted layer's height, drop the item in, resume. The lid bridges the opening, so keep it under about 40 mm across or tune bridge settings. - Breakaway support: keep the 0.4 mm side gap to the part and turn slicer supports off for that region. - Tiny dots depend on the slicer: check the preview shows them; if it drops them, use 1.0 mm dots or turn off small-gap filtering. file what overall mm perf-tab-box-40 40 × 40 × 20 mm one-time box: lid held by 76 dots (Ø0.8, 2 mm pitch, one 0.2 mm layer) on the wall tops, upright pull tab. Pause at z = 20 mm to load it 40 × 40 × 31.8 perf-tab-box-60x40 60 × 40 × 30 mm one-time box, same dotted seal; pause at z = 30 mm 60 × 40 × 41.8 perf-capsule-30 Ø30 × 25 mm round capsule, dotted rim seal, pull-tab lid; pause at z = 25 mm 30 × 30 × 36.8 perf-breakaway-support-coupon Breakaway support test: 30 mm overhang on a support block joined only by one dotted layer, 0.4 mm off the post 40 × 20 × 23 perf-test-strip Calibration strip: three pull tabs on dotted layers at 1.5, 2 and 3 mm pitch 72 × 22 × 12.2 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - MakerWorld: Tamper Evident Seal with Container — web — Publisher's page; dimensions are facts — https://makerworld.com/models/1288041 - Prusa Research: Support material (contact Z distance, interface layers) — web — Publisher's page; dimensions are facts — https://help.prusa3d.com/article/support-material_1698 - OrcaSlicer: Support Advanced: Z distance, interface spacing — web — Publisher's page; dimensions are facts — https://www.orcaslicer.com/wiki/print_settings/support/support_settings_advanced.html Free files (Xem Studio Design License, Xem Studio; STEP + STL, 5 parts): https://xemstudio.com/files/3d-printing/perforated-tear-off-layer/index.json API: https://xemstudio.com/api/geometry?object=perforated-tear-off-layer