# 3D printable spiral torsion springs: flat clock springs with square-key hub and lever version (STL, STEP)

> How do I 3D print a torsion spring that returns a lever or knob to its start position?

- Category: Hardware › Springs & flexures
- Kind: Hardware
- Basis: Spiral torsion (clock) spring: flat strip wound in a plane that stores torque as it winds (Lesjöfors). Xem printable design: two Archimedean arms, square-key hub.
- Page: https://xemstudio.com/objects/printable-spiral-torsion-springs/ · JSON: https://xemstudio.com/api/geometry?object=printable-spiral-torsion-springs · Plain text: https://xemstudio.com/objects/printable-spiral-torsion-springs/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 67.5 | 60 | 10 |

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Hold the hub still on the square post and turn the ring (or lever): the arms wind and push it back.
- Stiffness rises with arm thickness cubed: 1.4 mm arms are about 2.7× the 1.0 mm.
- Keep rotation to about 60–90° for long life. PETG or nylon; PLA arms creep and crack.
- Print flat. Gaps between the arms are 1.8 mm (Ø30) to 5.4 mm (Ø60), no supports.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| hub key hole | 5 or 7 mm square | spiral spring post or a square shaft | slide | all |
| spring post shaft | key − 0.4 mm square | spring hub | slide | posts* |

## Sizes

| file | what | overall mm |
|---|---|---|
| spiral-spring-od30-t0.8 | Ø30 × 5 mm, 0.8 mm arms, 2 arms × 1.5 turns, 5 mm square key: light return spring | 30 × 30 × 5 |
| spiral-spring-od40-t1.0 | Ø40 × 5 mm, 1.0 mm arms, 5 mm square key: general return spring | 40 × 40 × 5 |
| spiral-spring-od40-t1.4 | Ø40 × 5 mm, 1.4 mm arms: about 2.7× stiffer than the 1.0 mm | 40 × 40 × 5 |
| spiral-spring-od60-t1.4 | Ø60 × 6 mm, 1.4 mm arms, 4 mm ring, 7 mm square key: large, long travel | 60 × 60 × 6 |
| spiral-spring-od40-lever | Ø40 spring with a 25 mm lever on the ring: spring-return lever / clicker | 67.5 × 40 × 5 |
| spiral-spring-post-5mm | Square post for the 5 mm key hubs: 4.6 mm square shaft, Ø14 flange, M2.5 pilot hole | 14 × 14 × 10 |
| spiral-spring-post-7mm | Square post for the 7 mm key hub: 6.6 mm square shaft, Ø18 flange | 18 × 18 × 10 |

## Where the files are

- Lesjöfors: [What is a clock spring & how does it work?](https://www.lesjofors.com/en/technology/insights/what-is-a-clock-spring/) — web — Publisher's page; dimensions are facts
- Lesjöfors: [Spiral torsion springs](https://www.lesjofors.com/en/products/flat-springs/spiral-torsion-springs/) — web — Publisher's page; dimensions are facts

## Free STEP/STL (7 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/index.json · license: https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/LICENSE.md

- spiral-spring-od30-t0.8: [STEP](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-od30-t0.8.step) · [STL](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-od30-t0.8.stl) — Ø30 × 5 mm, 0.8 mm arms, 2 arms × 1.5 turns, 5 mm square key: light return spring
- spiral-spring-od40-t1.0: [STEP](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-od40-t1.0.step) · [STL](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-od40-t1.0.stl) — Ø40 × 5 mm, 1.0 mm arms, 5 mm square key: general return spring
- spiral-spring-od40-t1.4: [STEP](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-od40-t1.4.step) · [STL](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-od40-t1.4.stl) — Ø40 × 5 mm, 1.4 mm arms: about 2.7× stiffer than the 1.0 mm
- spiral-spring-od60-t1.4: [STEP](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-od60-t1.4.step) · [STL](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-od60-t1.4.stl) — Ø60 × 6 mm, 1.4 mm arms, 4 mm ring, 7 mm square key: large, long travel
- spiral-spring-od40-lever: [STEP](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-od40-lever.step) · [STL](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-od40-lever.stl) — Ø40 spring with a 25 mm lever on the ring: spring-return lever / clicker
- spiral-spring-post-5mm: [STEP](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-post-5mm.step) · [STL](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-post-5mm.stl) — Square post for the 5 mm key hubs: 4.6 mm square shaft, Ø14 flange, M2.5 pilot hole
- spiral-spring-post-7mm: [STEP](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-post-7mm.step) · [STL](https://xemstudio.com/files/3d-printing/printable-spiral-torsion-springs/spiral-spring-post-7mm.stl) — Square post for the 7 mm key hub: 6.6 mm square shaft, Ø18 flange

## Questions

**Can you 3D print a torsion spring?**

Yes, as a flat spiral. It prints flat with no supports and stores torque as the ring turns against the hub.

**How far can a printed spiral spring turn?**

About 60–90° for long life in PETG or nylon; more for a few cycles.

**How do I mount it?**

Press the square hub onto the matching square post (5 or 7 mm) and tie the ring or lever to the moving part.

**How do I make it stronger?**

Use the thicker arms (1.4 mm) or the Ø60 size; torque rises with arm thickness cubed.

## Fits with

- [3D printable flat springs: serpentine zig-zag flexure, soft, medium and firm (STL, STEP)](https://xemstudio.com/objects/flat-serpentine-springs/)
- [Torsion spring wire Ø0.8, OD 8, 6 coils](https://xemstudio.com/objects/torsion-spring/)
- [3D printable bistable snap toggle: slider that clicks to either end, curved leaf springs (STL, STEP)](https://xemstudio.com/objects/bistable-snap-toggle/)
- [3D printable ratchet wheel and pawl: one-way sawtooth wheel, plain and spring pawl (STL, STEP)](https://xemstudio.com/objects/ratchet-wheel-and-pawl/)
- [Living hinge (flexure hinge)](https://xemstudio.com/objects/living-hinge/)
