Printable tri-clamp (45°): brewing sensor lids: 4, 6 and 8 in caps with every port a fermenter needs — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/printable-tri-clamp-brewing-sensor-lids/ (CC BY 4.0) Basis: Xem Studio design: Xem Studio design on the standard solid cap of each size: a 1½ in clamp port at the centre and a ring of PG13.5 probe ports, Ø6 O-ring probe glands, ¼ NPT half couplings and a ½ in hose barb; printable 45° back cone Catalog version: 2026-10-20 Sizes: see table below - 3D-printable tri-clamp: this is Xem Studio's print-friendly version of the standard sanitary fitting, drawn so it prints on an ordinary FDM or resin printer with no supports. Download the STL to print it, or the STEP to edit it. The files are true size (no printing allowance): add your own clearance in the slicer or CAD if your printer needs it. - For a vessel that can only be fitted through the top. Centre 1½ in clamp: a bubbler gravity cap, a thermowell, a dip tube, a carb stone or a racking cap. PG13.5 ports: pH, dissolved O₂ or CO₂ probes. Ø6 glands: temperature probes at two depths. ¼ NPT: a pressure transducer or gauge and a gas-in valve (nitrogen or CO₂). Barb: blow-off hose, or a gas-flow meter on the CO₂ coming off. - Weight is read with the vessel on a scale; gravity can be read with the bubbler cap instead of a floating hydrometer. - Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6. - Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside. - Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40. size_in layout clamp_1.5in pg13.5 glands_6mm npt_1/4 barbs 4 basic 1 1 1 1 1 6 basic 1 1 1 1 1 6 full 1 2 2 2 1 8 basic 1 1 1 1 1 8 full 1 2 2 2 1 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - DIN: DIN 40430 Pg (Panzergewinde) threads: PG13.5 Ø20.4 major, 1.41 pitch (18 tpi), Ø18.6 core; the thread of 12 mm process probes (pH, dissolved O2 / CO2) — standard — DIN; dimensions are facts [verify license at link] — https://www.din.de/en - ASME: B1.20.1 Pipe threads, general purpose (NPT): major diameter, L2, tap drill; B16.11 forged fittings (Class 3000 couplings); B36.10 Sch 40 bore — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/b1-20-1-pipe-threads-general-purpose-inch - GW Kent: Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness — web — publisher's guide; dimensions cited — https://www.gwkent.com/triclamp-guide - Dixon: 14MPHR brewery hose barb: A and barb OD B (hose ID + 0.040 in) per size, ½ to 6 in — PDF — publisher's catalogue; dimensions cited — https://www.cooneybrothers.com/userfiles/ad/documents/Dixon_Sanitary_14MPHRG600_Catalog.pdf - Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 5 parts): https://xemstudio.com/files/hardware/printable-tri-clamp-brewing-sensor-lids/index.json API: https://xemstudio.com/api/geometry?object=printable-tri-clamp-brewing-sensor-lids