# Raspberry Pi Camera Module 3

> What are the Raspberry Pi Camera Module 3 board and lens dimensions for a mount?

- Category: Electronics › Modules & cameras · 2023
- Kind: Modern device
- Basis: published mechanical drawing
- Page: https://xemstudio.com/objects/raspberry-pi-camera-module-3/ · JSON: https://xemstudio.com/api/geometry?object=raspberry-pi-camera-module-3 · Plain text: https://xemstudio.com/objects/raspberry-pi-camera-module-3/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); linked files under their publishers' licenses

## Overall (mm)

| length | width |
|---|---|
| 25 | 24 |

Mounting holes: 4 × Ø2.2 mm, pattern 21 x 12.5 mm, M2

## Notes

- Four 2.2 mm holes on a 21 × 12.5 mm pattern (same as Camera Module 2); lens position differs between standard and wide variants.
- Ribbon cable exits the bottom edge.

## Where the files are

- Raspberry Pi Ltd (official): [Camera documentation (mechanical drawings)](https://www.raspberrypi.com/documentation/accessories/camera.html) — PDF — CC BY-SA 4.0 (Raspberry Pi documentation) (verify at link)

## Questions

**What are the Raspberry Pi Camera Module 3 dimensions in mm?**

25 × 24 mm (length × width × height). Four 2.2 mm holes on a 21 × 12.5 mm pattern (same as Camera Module 2); lens position differs between standard and wide variants.

**What is the Raspberry Pi Camera Module 3 mounting hole pattern?**

4 × Ø2.2 mm on a 21 x 12.5 mm pattern, M2 screws.

**Where is the official CAD for the Raspberry Pi Camera Module 3?**

Raspberry Pi Ltd (official): Camera documentation (mechanical drawings) (PDF, CC BY-SA 4.0 (Raspberry Pi documentation)). Linked from the sheet; Xem Studio does not rehost it.

## Fits with

- [Raspberry Pi 5](https://xemstudio.com/objects/raspberry-pi-5/)
- [Raspberry Pi Zero 2 W](https://xemstudio.com/objects/raspberry-pi-zero-2-w/)
- [GoPro-style three-finger mount](https://xemstudio.com/objects/gopro-mount/)
- [Threaded standoffs, M2.5 and M3 (hex and round)](https://xemstudio.com/objects/threaded-standoffs-metric/)