# Raspberry Pi Pico 2

> Is the Raspberry Pi Pico 2 the same size as the Pico?

- Category: Electronics › Microcontroller boards · 2024
- Kind: Modern device
- Basis: published mechanical drawing
- Page: https://xemstudio.com/objects/raspberry-pi-pico-2/ · JSON: https://xemstudio.com/api/geometry?object=raspberry-pi-pico-2 · Plain text: https://xemstudio.com/objects/raspberry-pi-pico-2/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); linked files under their publishers' licenses

## Overall (mm)

| length | width | height |
|---|---|---|
| 51 | 21 | 1 |

Mounting holes: 4 × Ø2.1 mm, pattern 47 x 11.4 mm, M2

## Notes

- Same outline, castellations and 47 × 11.4 mm hole pattern as the original Pico; enclosures carry over.
- Pico 2 W adds the antenna area at the end opposite the USB connector.

## Where the files are

- Raspberry Pi Ltd (official): [Pico 2 datasheet (mechanical drawing inside)](https://datasheets.raspberrypi.com/pico/pico-2-datasheet.pdf) — PDF — CC BY-SA 4.0 (Raspberry Pi documentation) (verify at link)

## Questions

**What are the Raspberry Pi Pico 2 dimensions in mm?**

51 × 21 × 1 mm (length × width × height). Same outline, castellations and 47 × 11.4 mm hole pattern as the original Pico; enclosures carry over.

**What is the Raspberry Pi Pico 2 mounting hole pattern?**

4 × Ø2.1 mm on a 47 x 11.4 mm pattern, M2 screws.

**Where is the official CAD for the Raspberry Pi Pico 2?**

Raspberry Pi Ltd (official): Pico 2 datasheet (mechanical drawing inside) (PDF, CC BY-SA 4.0 (Raspberry Pi documentation)). Linked from the sheet; Xem Studio does not rehost it.

## Fits with

- [Raspberry Pi Pico](https://xemstudio.com/objects/raspberry-pi-pico/)
- [Threaded standoffs, M2.5 and M3 (hex and round)](https://xemstudio.com/objects/threaded-standoffs-metric/)