# Raspberry Pi Zero 2 W

> What are the Raspberry Pi Zero 2 W dimensions and hole positions?

- Category: Electronics › Single-board computers · 2021
- Kind: Modern device
- Basis: published mechanical drawing
- Page: https://xemstudio.com/objects/raspberry-pi-zero-2-w/ · JSON: https://xemstudio.com/api/geometry?object=raspberry-pi-zero-2-w · Plain text: https://xemstudio.com/objects/raspberry-pi-zero-2-w/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); linked files under their publishers' licenses

## Overall (mm)

| length | width |
|---|---|
| 65 | 30 |

Mounting holes: 4 × Ø2.75 mm, pattern 58 x 23, 3.5 from each edge mm, M2.5

## Notes

- Same outline and holes as the original Zero and Zero W.
- Mini-HDMI and two micro-USB on one long edge; camera connector on the short edge.

## Where the files are

- Raspberry Pi Ltd (official): [Raspberry Pi Zero 2 W mechanical drawing (PDF)](https://datasheets.raspberrypi.com/rpizero2/raspberry-pi-zero-2-w-mechanical-drawing.pdf) — PDF — CC BY-SA 4.0 (Raspberry Pi documentation) (verify at link)

## Questions

**What are the Raspberry Pi Zero 2 W dimensions in mm?**

65 × 30 mm (length × width × height). Same outline and holes as the original Zero and Zero W.

**What is the Raspberry Pi Zero 2 W mounting hole pattern?**

4 × Ø2.75 mm on a 58 x 23, 3.5 from each edge mm pattern, M2.5 screws.

**Where is the official CAD for the Raspberry Pi Zero 2 W?**

Raspberry Pi Ltd (official): Raspberry Pi Zero 2 W mechanical drawing (PDF) (PDF, CC BY-SA 4.0 (Raspberry Pi documentation)). Linked from the sheet; Xem Studio does not rehost it.

## Fits with

- [Threaded standoffs, M2.5 and M3 (hex and round)](https://xemstudio.com/objects/threaded-standoffs-metric/)
- [Raspberry Pi Camera Module 3](https://xemstudio.com/objects/raspberry-pi-camera-module-3/)
- [Raspberry Pi Pico](https://xemstudio.com/objects/raspberry-pi-pico/)