Ride height — dimension sheet
Source: Xem Studio, https://xemstudio.com/objects/ride-height/  (sheet CC BY 4.0)
Basis: Design rules and figures from the cited sources; example geometry by Xem Studio
Catalog version: 2026-10-20

Sizes: see table below
- Ride height sets CG height and how much travel is available before bottoming. Too high feels floaty; too low bottoms out (EuroRC).
- Tekno: more front (or less rear) height moves weight rearward on power for stability; more rear (or less front) moves weight forward off power for more steering. Measure after dropping the car from about 6 in.
- Full-size aero cars care too: HPA recommends ~70 mm static splitter height because downforce lowers the car on track.

parameter  value or range  source
1/10 touring  5-7 mm  EuroRC set-up guide
1/10 buggy  28-32 mm front, 30-35 mm rear  EuroRC set-up guide
1/8 buggy  35-42 mm front, 38-45 mm rear  EuroRC set-up guide
Short course  30-38 mm  EuroRC set-up guide
Rough-surface change  +2-4 mm  EuroRC set-up guide
Splitter static height (full size)  ~70 mm  HPA splitter

Files elsewhere (not hosted by Xem Studio; license as stated by the publisher):
- EuroRC: Short set-up guide — web — Publisher's page; dimensions are facts — https://www.eurorc.com/page/135/short-set-up-guide
- Tekno RC: Tekno RC Setup Guide — web — Publisher's page; dimensions are facts — https://teknoforums.com/misc/Tekno-RC-Setup-Guide.pdf
- High Performance Academy: Aerodynamic performance devices for club level cars: front splitters — web — Publisher's page; dimensions are facts — https://www.hpacademy.com/courses/aerodynamics-fundamentals/aerodynamic-performance-devices-for-club-level-cars-front-splitters

No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned.
API: https://xemstudio.com/api/geometry?object=ride-height