Sanitary clamp ferrules, 10 and 12 in (L14AM7, tri-clamp style) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/sanitary-clamp-ferrules-10-12in/ (CC BY 4.0) Basis: Tube OD 10.000 / 12.000 in, bore 9.732 / 11.732 in, length 1.500 in from the Holland and Shaw EG14AM7 tables (they agree, and Steel & O'Brien's L14AM7 is 1.500 in); flange 10.570 / 12.570 in from the cap tables; ISO 2852 face profile Catalog version: 2026-10-20 Sizes: see table below - Medium weld ferrules: the 1.500 in length is the one all three catalogues agree on (short ferrules differ by maker: 0.875 and 0.937 in are both listed, so I do not draw one). - Wall 0.134 in (3.40 mm) at both sizes: the published bore subtracted from the published tube OD. - The gasket-groove diameter (C2) at 10 and 12 in is not in ISO 2852 (its table stops below these sizes): it is drawn at flange − 7.5 mm, the land width the site already uses for the 4 in, and stated as derived. Everything else here is from the cited tables. size_in tube_od_mm wall_mm bore_mm flange_od_mm groove_mm_derived length_mm 10 254.0 3.4 247.19 268.48 260.98 38.099999999999994 12 304.8 3.4 297.99 319.28 311.78 38.099999999999994 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Steel & O'Brien: Sanitary products catalog 2024: 16AMP end caps 10 / 12 in (A 0.480, B 10.570 / 12.570 in); L14AM7 ferrules 1.500 in; clamp ratings 13MHHM, 13MHP, 13ASME — PDF — publisher's catalogue; dimensions cited, nothing copied — https://www.steelobrien.com/wp-content/uploads/2024/03/Sanitary-2024-FINAL.pdf - Holland Applied Technologies: Sanitary tri-clamp fittings: EG14AM7 ferrules 8 / 10 / 12 in (1.500, bore 9.732 / 11.732 in, tube 10.000 / 12.000 in); EG16A caps (10.570 / 12.570 in) — PDF — publisher's catalogue; dimensions cited, nothing copied — https://hollandapt.com/wp-content/uploads/2022/12/Sanitary-Tri-Clamp-Fittings.pdf - Shaw Stainless & Alloy: Sanitary clamp data sheet: EG14AM7 ferrules (bore 9.732 / 11.732 in), EG16A caps 10.570 / 12.570 in, 13MHHM ratings — PDF — publisher's data sheet; dimensions cited, nothing copied — https://stainlessandalloy.com/pdf/data-sheets/sanitary-clamp-data-sheet.pdf - ISO (via iTeh sample): ISO 2852 clamp liners: face profile (2.85 rim, 1.6 recess, 20° back) and land width — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/sanitary-clamp-ferrules-10-12in/index.json API: https://xemstudio.com/api/geometry?object=sanitary-clamp-ferrules-10-12in