# Sanitary clamp reducing tees (7RMP style), ¾ to 6 in run

> What are the dimensions of a 2 × 1½ inch tri-clamp reducing tee?

- Category: Hardware › Sanitary clamp fittings
- Kind: Standard part
- Basis: Steel & O'Brien S7RMP: A run centre to face, B run face to face, C branch centre to face; ISO 2852 faces on BPE tube
- Page: https://xemstudio.com/objects/sanitary-clamp-reducing-tees/ · JSON: https://xemstudio.com/api/geometry?object=sanitary-clamp-reducing-tees · Plain text: https://xemstudio.com/objects/sanitary-clamp-reducing-tees/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); linked files under their publishers' licenses
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** True size, with no printing tolerance added.

## Notes

- Run of one size with a smaller branch: a port for a thermowell, valve or sample point without a reducer.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

## Sizes

| size_in | run_face_to_face_mm | run_c_to_f_mm | branch_c_to_f_mm |
|---|---|---|---|
| ¾ × ½ | 127.0 | 63.5 | 63.5 |
| 1 × ½ | 133.3 | 66.7 | 66.7 |
| 1 × ¾ | 133.3 | 66.7 | 66.7 |
| 1½ × ½ | 146.0 | 73.0 | 73.0 |
| 1½ × 1 | 146.0 | 73.0 | 73.0 |
| 2 × ½ | 171.4 | 85.7 | 79.4 |
| 2 × ¾ | 171.4 | 85.7 | 79.4 |
| 2 × 1 | 171.4 | 85.7 | 79.4 |
| 2 × 1½ | 171.4 | 85.7 | 79.4 |
| 2½ × 1½ | 184.1 | 92.1 | 85.7 |
| 2½ × 2 | 184.1 | 92.1 | 85.7 |
| 3 × 1½ | 196.8 | 98.4 | 92.1 |
| 3 × 2 | 196.8 | 98.4 | 92.1 |
| 3 × 2½ | 196.8 | 98.4 | 92.1 |
| 4 × 1½ | 241.3 | 120.6 | 104.8 |
| 4 × 2 | 241.3 | 120.6 | 111.1 |
| 4 × 3 | 241.3 | 120.6 | 111.1 |
| 6 × 3 | 361.9 | 181.0 | 136.5 |
| 6 × 4 | 361.9 | 181.0 | 146.0 |

## Where the files are

- Steel & O'Brien: [S7RMP reducing tee, clamp ends: A, B, C per run × branch](https://www.steelobrien.com/products/bpe-fittings/bpe-clamp-fittings/bpe-tees-crosses/s7rmp-reducing-tee-clamp-ends) — web — publisher's table; dimensions cited
- GW Kent: [Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness](https://www.gwkent.com/triclamp-guide) — web — publisher's guide; dimensions cited
- Rubber Fab: [Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)](https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf) — PDF — maker chart; dimensions are facts (verify at link)

## Free STEP/STL (19 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/index.json

- reducing-tee-0.75in-x-0.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-0.75in-x-0.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-0.75in-x-0.5in.stl) — ¾ × ½ in reducing tee: run 5.0 in face to face, branch 2.5 in centre to face
- reducing-tee-1in-x-0.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-1in-x-0.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-1in-x-0.5in.stl) — 1 × ½ in reducing tee: run 5.25 in face to face, branch 2.625 in centre to face
- reducing-tee-1in-x-0.75in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-1in-x-0.75in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-1in-x-0.75in.stl) — 1 × ¾ in reducing tee: run 5.25 in face to face, branch 2.625 in centre to face
- reducing-tee-1.5in-x-0.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-1.5in-x-0.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-1.5in-x-0.5in.stl) — 1½ × ½ in reducing tee: run 5.75 in face to face, branch 2.875 in centre to face
- reducing-tee-1.5in-x-1in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-1.5in-x-1in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-1.5in-x-1in.stl) — 1½ × 1 in reducing tee: run 5.75 in face to face, branch 2.875 in centre to face
- reducing-tee-2in-x-0.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2in-x-0.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2in-x-0.5in.stl) — 2 × ½ in reducing tee: run 6.75 in face to face, branch 3.125 in centre to face
- reducing-tee-2in-x-0.75in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2in-x-0.75in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2in-x-0.75in.stl) — 2 × ¾ in reducing tee: run 6.75 in face to face, branch 3.125 in centre to face
- reducing-tee-2in-x-1in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2in-x-1in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2in-x-1in.stl) — 2 × 1 in reducing tee: run 6.75 in face to face, branch 3.125 in centre to face
- reducing-tee-2in-x-1.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2in-x-1.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2in-x-1.5in.stl) — 2 × 1½ in reducing tee: run 6.75 in face to face, branch 3.125 in centre to face
- reducing-tee-2.5in-x-1.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2.5in-x-1.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2.5in-x-1.5in.stl) — 2½ × 1½ in reducing tee: run 7.25 in face to face, branch 3.375 in centre to face
- reducing-tee-2.5in-x-2in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2.5in-x-2in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-2.5in-x-2in.stl) — 2½ × 2 in reducing tee: run 7.25 in face to face, branch 3.375 in centre to face
- reducing-tee-3in-x-1.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-3in-x-1.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-3in-x-1.5in.stl) — 3 × 1½ in reducing tee: run 7.75 in face to face, branch 3.625 in centre to face
- reducing-tee-3in-x-2in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-3in-x-2in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-3in-x-2in.stl) — 3 × 2 in reducing tee: run 7.75 in face to face, branch 3.625 in centre to face
- reducing-tee-3in-x-2.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-3in-x-2.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-3in-x-2.5in.stl) — 3 × 2½ in reducing tee: run 7.75 in face to face, branch 3.625 in centre to face
- reducing-tee-4in-x-1.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-4in-x-1.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-4in-x-1.5in.stl) — 4 × 1½ in reducing tee: run 9.5 in face to face, branch 4.125 in centre to face
- reducing-tee-4in-x-2in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-4in-x-2in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-4in-x-2in.stl) — 4 × 2 in reducing tee: run 9.5 in face to face, branch 4.375 in centre to face
- reducing-tee-4in-x-3in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-4in-x-3in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-4in-x-3in.stl) — 4 × 3 in reducing tee: run 9.5 in face to face, branch 4.375 in centre to face
- reducing-tee-6in-x-3in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-6in-x-3in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-6in-x-3in.stl) — 6 × 3 in reducing tee: run 14.25 in face to face, branch 5.375 in centre to face
- reducing-tee-6in-x-4in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-6in-x-4in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-reducing-tees/reducing-tee-6in-x-4in.stl) — 6 × 4 in reducing tee: run 14.25 in face to face, branch 5.75 in centre to face

## Questions

**How long is a 2 × 1½ in reducing tee?**

6.750 in (171.5 mm) face to face; the 1½ in branch is 3.125 in (79.4 mm) from the run centreline.

## Fits with

- [Sanitary clamp tees and short-outlet tees (7MP, 7MPS): ½ to 4 in](https://xemstudio.com/objects/sanitary-clamp-tees/)
- [Sanitary clamp reducers, concentric and eccentric, ½ to 4 in (tri-clamp style, BPE)](https://xemstudio.com/objects/sanitary-clamp-reducers/)