SICK TiM571-2050101 2D LiDAR (1075091): housing size, rear M3 mounting holes and scan-plane height — dimension sheet
Source: Xem Studio, https://xemstudio.com/objects/sick-tim571-2050101/  (sheet CC BY 4.0)
Basis: SICK data sheet TiM571-2050101 (part 1075091), dimensional drawing and technical data.
Catalog version: 2026-10-20

Overall (mm): length 61.0, width 60.0, height 85.75
- Housing 60.0 wide × 61.0 deep × 85.75 high, bottom at 0; front face carries the logo and status LEDs, rear face the swivel connector unit.
- Two M3 threaded mounting holes in the rear face, 2.8 deep, 51.0 apart, centred 24.4 above the bottom (shown at Ø2.5 tap-drill size).
- Scan plane (light emission level) 62.46 above the bottom; 270° aperture.
- The housing is modelled to its overall size with the rear holes; the tapered optical hood and the swivel connector unit with its M12 connectors (which protrude behind and below) are not modelled.
- The separate mounting plates of SICK mounting set 1 are not included.
- All dimensions are exact nominal millimetres, true size, with no tolerance added.

Files elsewhere (not hosted by Xem Studio; license as stated by the publisher):
- SICK: TiM571-2050101 product page (1075091) — web — Publisher's page; dimensions are facts — https://www.sick.com/products/1075091
- SICK: TiM571-2050101 data sheet (PDF) — web — Publisher's page; dimensions are facts — https://cdn.sick.com/media/pdf/1/91/091/dataSheet_TiM571-2050101_1075091_en.pdf

Free files (CC BY 4.0, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/sick-tim571-2050101/index.json
API: https://xemstudio.com/api/geometry?object=sick-tim571-2050101