Side-mount ball-bearing drawer slides: Accuride 3832 (12 to 28 in) and Knape & Vogt 8400 / 8450 / 4400: height, 1/2 in side space, 32 mm hole pattern — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/side-mount-drawer-slides/ (sheet CC BY 4.0) Basis: Accuride 3832 data sheets (AA and EC), Knape & Vogt catalog PDFs; hole-position tables are not used where the extraction was unreliable Catalog version: 2026-10-20 Sizes: see table below - Side-mount ball-bearing drawer slides are sold in pairs by length and are all drawn for the same 1/2 in (12.7 mm) of space on each side of the drawer box: Accuride 3832 specifies the side space as '.50 in + .031 / −0' (12.7 mm +0.8 / −0), Knape & Vogt as '1/2 in + 1/32 in / −0' per side for the 8400, 8450 and most of its side-mount range (the 1805 roller slide: 12.7 +0.8 / −0 mm). So a drawer box is the opening width minus 1 in (25.4 mm), plus the tolerance: Accuride's 3832EC sheet says 'drawer box construction 1-1/16 in (27.0 mm) less than the cabinet opening for best performance'. - Accuride 3832 (full extension, 100 lb per pair, 18 in slides in a 16 in drawer cycled 50,000 times): slide height 1.80 in (45.6 to 45.7 mm); lengths 12 to 28 in in 2 in steps, slide length 300 to 700 mm (the nominal inch length is the travel: 3832-C24 is 600 mm long and 610 mm travel); minimum drawer width 10 in for 12 to 16 in slides, 12 in for 18 to 22 in and 14 in for 24 to 28 in; hold-in detent, cam drawer adjust, vertical adjustment ±1/16 in (±1.6 mm), maximum cam head height 1/16 in. Mounting thickness printed on the sheet: 1/8 in (3.2 mm) for conventional mounting and 5.2 mm for 32 mm system mounting. Hole sizes printed: .172 in (4.4 mm) typical, .180 × .375 in slots, .187 × .310 in slots and .250 in (6.4 mm) round; the slot positions are printed as a table of lettered dimensions (224, 320, 352, 416, 448, 480, 544 mm ... depending on length) that the sheet read could not be reliably matched to the letters, so the per-length hole positions are not tabled. The 3832EC sheet gives the EC travel as 12.19 in (307 mm) for the 14 in size and 16 to 28 in as in the AA table. - Knape & Vogt (catalog PDFs): the 8400 family (8400, 8405, 8407, 8414, 8417, 8419, 8430, 8450FM, 8455FM) is 1-13/16 in high with the 32 mm hole pattern with 'direct access' mounting and a recommended maximum drawer width of 24 in; the 8350 / 8355 / 8357 are 1-3/8 in (35 mm) high, the 4400 / 4430 / 4450 are 1-13/32 in (36 mm), the 1300 is 3 in. Hole spacing as printed for the 8450FM: cabinet member 1-1/4 in (32 mm), 3-3/4 in (96 mm) and 2-1/2 in (64 mm) (the sheet extraction is partly garbled, so these are the multiples of 32 mm of the 32 mm system, not independently verified); drawer member 7/16 in (11 mm) and 1/2 in (13 mm). K&V load classes are 'pound class' guides, not rated loads. - Not covered: undermount, heavy-duty, ball-bearing slides with over-travel in other makers' catalogues, and the plastic roller slides. The 15-series T-slot bench slides are on their own page. No file: the slide section is not published as numbers (the sheets print outline drawings only). slide nominal length slide length, mm (in) travel, mm (in) slide height, mm (in) side clearance per side minimum drawer width (Accuride) / note load class hole pattern / notes Accuride 3832-C12 12 in 300 (11.81 in) 305 (12.00 in) 45.6 – 45.7 (1.80 in) 12.7 +0.8 / −0 (1/2 in + 1/32 / −0) 10 in (254 mm) 100 lb (45.5 kg) 32 mm system Accuride 3832-C14 14 in 350 (13.78 in) 356 (14.00 in) 45.6 – 45.7 (1.80 in) 12.7 +0.8 / −0 (1/2 in + 1/32 / −0) 10 in (254 mm) 100 lb (45.5 kg) 32 mm system Accuride 3832-C16 16 in 400 (15.75 in) 406 (16.00 in) 45.6 – 45.7 (1.80 in) 12.7 +0.8 / −0 (1/2 in + 1/32 / −0) 10 in (254 mm) 100 lb (45.5 kg) 32 mm system Accuride 3832-C18 18 in 450 (17.72 in) 457 (18.00 in) 45.6 – 45.7 (1.80 in) 12.7 +0.8 / −0 (1/2 in + 1/32 / −0) 12 in (305 mm) 100 lb (45.5 kg) 32 mm system Accuride 3832-C20 20 in 500 (19.69 in) 508 (20.00 in) 45.6 – 45.7 (1.80 in) 12.7 +0.8 / −0 (1/2 in + 1/32 / −0) 12 in (305 mm) 100 lb (45.5 kg) 32 mm system Accuride 3832-C22 22 in 550 (21.65 in) 559 (22.00 in) 45.6 – 45.7 (1.80 in) 12.7 +0.8 / −0 (1/2 in + 1/32 / −0) 12 in (305 mm) 100 lb (45.5 kg) 32 mm system Accuride 3832-C24 24 in 600 (23.62 in) 610 (24.00 in) 45.6 – 45.7 (1.80 in) 12.7 +0.8 / −0 (1/2 in + 1/32 / −0) 14 in (356 mm) 100 lb (45.5 kg) 32 mm system Accuride 3832-C26 26 in 650 (25.59 in) 660 (26.00 in) 45.6 – 45.7 (1.80 in) 12.7 +0.8 / −0 (1/2 in + 1/32 / −0) 14 in (356 mm) 100 lb (45.5 kg) 32 mm system Accuride 3832-C28 28 in 700 (27.56 in) 711 (28.00 in) 45.6 – 45.7 (1.80 in) 12.7 +0.8 / −0 (1/2 in + 1/32 / −0) 14 in (356 mm) 100 lb (45.5 kg) 32 mm system Knape & Vogt 8400 / 8407 8 – 28 in (8407: 10 – 28) — — 1-13/16 in (46) 1/2 in + 1/32 / −0 per side (K&V: 'most side-mount slides') max. drawer width 24 in recommended (84xx) 100 lb class 32 mm pattern, direct access Knape & Vogt 8405 (1 in over-travel) 10 – 28 in — — 1-13/16 in 1/2 in + 1/32 / −0 per side (K&V: 'most side-mount slides') max. drawer width 24 in recommended (84xx) 90 lb class 32 mm pattern Knape & Vogt 8450FM (soft-close) 12 – 28 in — — 1-13/16 in 1/2 in + 1/32 / −0 per side (K&V: 'most side-mount slides') max. drawer width 24 in recommended (84xx) 100 lb class 32 mm and traditional; cabinet member 1-1/4 (32), 3-3/4 (96), 2-1/2 (64) in/mm as printed Knape & Vogt 8455FM (soft-close, 1 in over-travel) 16 – 28 in — — 1-13/16 in 1/2 in + 1/32 / −0 per side (K&V: 'most side-mount slides') max. drawer width 24 in recommended (84xx) 90 lb class 32 mm and traditional Knape & Vogt 8350 12 – 30 in — — 1-3/8 in (35 mm) 1/2 in + 1/32 / −0 per side (K&V: 'most side-mount slides') — 75 lb class 32 mm pattern, lever disconnect Knape & Vogt 4400 / 4430 / 4450 10 – 28 in (4430, 4450: 10 – 24) — — 1-13/32 in (36 mm) 1/2 in + 1/32 / −0 per side (K&V: 'most side-mount slides') — 65 lb class lever release / push-to-open / soft-close Knape & Vogt 1300 12 – 28 in — — 3 in 1/2 in + 1/32 / −0 per side (K&V: 'most side-mount slides') — 75 lb class ball bearing, positive stop lever Knape & Vogt 1284 300 – 650 mm — — 1-9/32 in (32.5 mm) 1/2 in + 1/32 / −0 per side (K&V: 'most side-mount slides') — 75 lb class ball-bearing rollers, epoxy finish Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Accuride (datasheets.com copy): 3832-C24AA data sheet: slide length / travel for 12 to 28 in, height 1.80 in, side space .50 +.031 / -0, 32 mm system, minimum drawer width — web — Publisher's page; dimensions are facts — https://static.datasheets.com/doc/5306752-accuride-3832-c24aa-ds.pdf - Accuride (tech sheet): 3832EC next-gen tech sheet: 1.80 in x 1/2 in, side space 12.7 +0.8 / -0, 100 lb — web — Publisher's page; dimensions are facts — https://d1ffabcce73sv0.cloudfront.net/113/55/documents/ac_tech+sheet_3832ec_next-gen_v5_0523+2+2.pdf - Knape & Vogt (catalog PDF, Unilog copy): Drawer slide catalog: models 8400, 8405, 8450FM, 4400, 8350, 1300 etc.: height, lengths, load class, 1/2 in + 1/32 / -0 side clearance, 32 mm pattern — web — Publisher's page; dimensions are facts — https://assets.unilogcorp.com/187/ITEM/DOC/Knape_Vogt_100057231_Catalog.pdf - Knape & Vogt (catalog PDF, Orgill copy): Drawer slide catalog: light, medium and MuV slides, clearances and hole patterns — web — Publisher's page; dimensions are facts — https://images.orgill.com/weblarge/10027/Knape_Vogt_8450FMP_16_Catalog.pdf No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned. API: https://xemstudio.com/api/geometry?object=side-mount-drawer-slides