# 3D printable spring-lever star-wheel ratchet indexer: 8-step index wheel with printed leaf-spring lever (STL, STEP)

> How do I make a 3D printed indexing wheel that clicks in fixed steps?

- Category: Mechanisms › Intermittent motion
- Kind: Hardware
- Basis: Spring-lever star-wheel ratchet indexer: designed for 3D printing, exact nominal mm.
- Page: https://xemstudio.com/objects/star-wheel-ratchet-indexer/ · JSON: https://xemstudio.com/api/geometry?object=star-wheel-ratchet-indexer · Plain text: https://xemstudio.com/objects/star-wheel-ratchet-indexer/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 72.0 | 90.0 | 9.7 |

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: star-indexer-assembled; step to the nearest standard size (and redraw the hole or pocket it fits): star-indexer-spring-lever.
- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.
- 8 teeth = 45 degree steps; the lever tip sits in a valley against the radial tooth face.
- The leaf spring is printed on the lever; preload it against the 6 mm post (bend it slightly when assembling).
- Wheel: OD 44, 7 mm tooth depth, bore 5.4 for the 5 mm pin.
- Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| wheel and lever bores | Ø5.4 on Ø5 pin | base pins | run | all |

## Sizes

| file | what | overall mm |
|---|---|---|
| star-indexer-assembled | assembled: 3 parts in place | 72 × 90 × 9.7 |
| star-indexer-base | star indexer base | 72 × 90 × 9.7 |
| star-indexer-wheel | star indexer wheel | 44 × 44 × 5 |
| star-indexer-spring-lever | star indexer lever | 44.8 × 21.3 × 5 |

## Where the files are

- Wikipedia: [Ratchet (device)](https://en.wikipedia.org/wiki/Ratchet_(device)) — web — Publisher's page; dimensions are facts
- Wikipedia: [Detent](https://en.wikipedia.org/wiki/Detent) — web — Publisher's page; dimensions are facts

## Free STEP/STL (4 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/index.json · license: https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/LICENSE.md

- star-indexer-assembled: [STEP](https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-assembled.step) · [STL](https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-assembled.stl) — star indexer assembly
- star-indexer-base: [STEP](https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-base.step) · [STL](https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-base.stl) — star indexer base
- star-indexer-wheel: [STEP](https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-wheel.step) · [STL](https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-wheel.stl) — star indexer wheel
- star-indexer-spring-lever: [STEP](https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-spring-lever.step) · [STL](https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-spring-lever.stl) — star indexer lever

## Questions

**How many steps per turn?**

8 (45 degrees each).

**Why does it lock one way?**

The teeth have a radial face on one side: the lever tip catches it counter-clockwise and rides up the slope clockwise.

**Do I need a metal spring?**

No, the leaf spring is printed on the lever.

## Fits with

- [3D printable ratchet wheel and pawl: one-way sawtooth wheel, plain and spring pawl (STL, STEP)](https://xemstudio.com/objects/ratchet-wheel-and-pawl/)
- [3D printable bistable snap toggle: slider that clicks to either end, curved leaf springs (STL, STEP)](https://xemstudio.com/objects/bistable-snap-toggle/)
- [3D printable spiral torsion springs: flat clock springs with square-key hub and lever version (STL, STEP)](https://xemstudio.com/objects/printable-spiral-torsion-springs/)
