3D printable spring-lever star-wheel ratchet indexer: 8-step index wheel with printed leaf-spring lever (STL, STEP) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/star-wheel-ratchet-indexer/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: Spring-lever star-wheel ratchet indexer: designed for 3D printing, exact nominal mm. Catalog version: 2026-10-20 Overall (mm): length 72.0, width 90.0, height 9.7 - Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: star-indexer-assembled; step to the nearest standard size (and redraw the hole or pocket it fits): star-indexer-spring-lever. - Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up. - 8 teeth = 45 degree steps; the lever tip sits in a valley against the radial tooth face. - The leaf spring is printed on the lever; preload it against the 6 mm post (bend it slightly when assembling). - Wheel: OD 44, 7 mm tooth depth, bore 5.4 for the 5 mm pin. - Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid. file what overall mm star-indexer-assembled assembled: 3 parts in place 72 × 90 × 9.7 star-indexer-base star indexer base 72 × 90 × 9.7 star-indexer-wheel star indexer wheel 44 × 44 × 5 star-indexer-spring-lever star indexer lever 44.8 × 21.3 × 5 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Wikipedia: Ratchet (device) — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Ratchet_(device) - Wikipedia: Detent — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Detent Free files (Xem Studio Design License, Xem Studio; STEP + STL, 4 parts): https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/index.json API: https://xemstudio.com/api/geometry?object=star-wheel-ratchet-indexer