Swash plate follower 8 × 8 × 30 with Ø8 ball end — dimension sheet
Source: Xem Studio, https://xemstudio.com/objects/swash-follower/  (CC BY 4.0)
Basis: 8 mm square pushrod 30 long with an Ø8 ball on one end and a Ø3 × 10 hole in the other
Catalog version: 2026-10-20

Sizes: see table below
- An 8 × 8 square pushrod 30 long; an Ø8 ball centred on one end face bears on the swash plate, making it 34 overall.
- The other end has an axial Ø3 hole 10 deep for a Ø3 pin to the piston or link.
- It runs in a square 8 × 8 guide so it slides without turning.

feature  value_mm
section  8 × 8
length  30 (34 with ball)
ball  Ø8
tail hole  Ø3 × 10

Files elsewhere (not hosted by Xem Studio; license as stated by the publisher):
- Wikipedia: Swashplate — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Swashplate
- Long Earth Society: Engine and rig builds on extrusion frames — web, video — LES site — https://longearthsociety.com/engineering/

Free files (CC BY 4.0, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/swash-follower/index.json
API: https://xemstudio.com/api/geometry?object=swash-follower