Printable tri-clamp (45°): ferrules, spools and caps, ½ to 4 in — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/tri-clamp-45-degree-printable/ (CC BY 4.0) Basis: Xem Studio design: ISO 2852 face unchanged, back cone 45°; tube and flange per size as the standard ferrules on this site Catalog version: 2026-10-20 Sizes: see table below - Ferrules ½ and 1⅛ in long, spools 3, 6 and 12 in, solid caps per flange size. hub_mm is the rim plus the 45° cone, measured from the face along the tube. - Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6. - Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside. - Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40. size_in tube_od_mm flange_mm groove_mm hub_mm ½ 12.7 25.0 20.4 9.0 ¾ 19.05 25.0 20.4 5.82 1 25.4 50.5 43.5 15.4 1½ 38.1 50.5 43.5 9.05 2 50.8 64.0 56.5 9.45 2½ 63.5 77.5 70.5 9.85 3 76.2 91.0 83.5 10.25 4 101.6 119.0 110.0 11.55 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - GW Kent: Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness — web — publisher's guide; dimensions cited — https://www.gwkent.com/triclamp-guide - Rubber Fab: Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676) — PDF — publisher's chart; dimensions cited, nothing copied — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf - Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 46 parts): https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/index.json API: https://xemstudio.com/api/geometry?object=tri-clamp-45-degree-printable