Tri-clamp caps with PG13.5 probe ports (12 mm pH, dissolved O₂ and CO₂ probes): 1½ to 4 in — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/tri-clamp-pg13-5-probe-ports/ (CC BY 4.0) Basis: Xem Studio design on the standard solid cap: PG13.5 (DIN 40430: Ø20.4 major, 1.41 pitch, Ø18.6 core) in a Ø30 boss, drawn as the core bore over 12 mm of thread, Ø12.5 through for the 12 mm probe shaft Catalog version: 2026-10-20 Sizes: see table below - Most process probes (pH, ORP, dissolved oxygen, dissolved CO₂, conductivity) are 12 mm shafts with a PG13.5 thread on the head: they screw straight into this port and seal on their own O-ring. - Probe length sets how deep the tip reaches below the clamp face; pick the probe so its tip sits in the liquid at your lowest fill. - Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40. clamp ports pg_major_mm core_mm probe_mm 1–1½ 1 20.4 18.6 12.0 2 1 20.4 18.6 12.0 3 2 20.4 18.6 12.0 3 3 20.4 18.6 12.0 4 3 20.4 18.6 12.0 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - DIN: DIN 40430 Pg (Panzergewinde) threads: PG13.5 Ø20.4 major, 1.41 pitch (18 tpi), Ø18.6 core; the thread of 12 mm process probes (pH, dissolved O2 / CO2) — standard — DIN; dimensions are facts [verify license at link] — https://www.din.de/en - GW Kent: Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness — web — publisher's guide; dimensions cited — https://www.gwkent.com/triclamp-guide - Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 5 parts): https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/index.json API: https://xemstudio.com/api/geometry?object=tri-clamp-pg13-5-probe-ports