U-handles / cabinet pull handles: Ganter GN 426.5 Ø20 and Ø28 × 200–400 (thread, height) and McMaster-Carr mounting-hole spacing options — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/u-handles-gn-426-pull-handles/ (sheet CC BY 4.0) Basis: Ganter's GN 426.5 stainless cabinet U-handle datasheet (16 rows: types A and B, Ø20 and Ø28), Ganter's aluminum GN 426 sheet for d1, length and thread, and the option lists on McMaster-Carr's pull handle page; numbers only Catalog version: 2026-10-20 Sizes: see table below - GN 426.5 columns are Ganter's own symbols in the order printed: d1 (grip diameter; solid Ø20 or tube Ø28 × 4 per the aluminum sheet), l1 (tolerance ±0.5 for type A and ±0.3 for type B), the thread d2 (M 8 for Ø20, M 10 for Ø28; labelled 'threaded bore for mounting stud' for type B), d3, h, l2, r ≈, t1 and t2. The sheet's text has ten values per row against nine labelled columns; the tenth (a number between 540 and 1086) is not labelled and is left out. Type A is mounted from the back (blind threaded bore); type B from the operator's side. - Hole spacing: neither Ganter sheet labels a 'hole spacing' or 'centre distance' column. l1 is the one length that varies with the handle (200 to 400 mm) and the sheet prints it as the handle length; do not read it as the mounting-hole centre distance without checking Ganter's drawing, where the studs sit. The aluminum GN 426 sheet gives d1 20 with lengths 200 and 300 and d1 28 with lengths 250, 350 and 500, with M8 and M10 threads, and other columns that could not be assigned; its figures agree with the GN 426.5 rows on d1 and thread. - McMaster-Carr's page prints the mounting-hole center-to-center options in inches (3/4 to 3-3/4 in; options only, not tied to a specific handle) and, separately, mounting stud center-to-center options (2 to 6 in), plus grip diameters of 1/8 in to 1-1/2 in and 8 to 30 mm and the thread sizes above. The values are option lists, so a particular handle's spacing, thread and grip are on its own part page. - Related handles: DIN 39 fixed handles are on fixed-handles-din-39, broom and tool handles on broom-and-tool-handles. No file: the bent-tube path and the mounting-boss shapes are not given as numbers (the spacing is not labelled). McMaster-Carr sells pull handles with per-part STEP; linked, not copied. source d1 l1 | center-to-center options thread d2 | thread options d3 h l2 r ≈ t1 t2 GN 426.5 type A 20 200 M 8 — 68 20 22 15 — GN 426.5 type A 20 250 M 8 — 68 20 22 15 — GN 426.5 type A 20 300 M 8 — 68 20 22 15 — GN 426.5 type A 20 350 M 8 — 68 20 22 15 — GN 426.5 type A 28 250 M 10 32 90 20 32 — 17 GN 426.5 type A 28 300 M 10 32 90 20 32 — 17 GN 426.5 type A 28 350 M 10 32 90 20 32 — 17 GN 426.5 type A 28 400 M 10 32 90 20 32 — 17 GN 426.5 type B 20 200 M 8 — 68 20 22 15 — GN 426.5 type B 20 250 M 8 — 68 20 22 15 — GN 426.5 type B 20 300 M 8 — 68 20 22 15 — GN 426.5 type B 20 350 M 8 — 68 20 22 15 — GN 426.5 type B 28 250 M 10 32 90 20 32 — 17 GN 426.5 type B 28 300 M 10 32 90 20 32 — 17 GN 426.5 type B 28 350 M 10 32 90 20 32 — 17 GN 426.5 type B 28 400 M 10 32 90 20 32 — 17 McMaster-Carr: mounting-hole center-to-center options (in) — 1/2", 3/4", 13/16", 7/8", 1", 1-1/4", 1-3/8", 2", 2-1/4", 2-3/8", 2-1/2", 2-3/4", 2-13/16", 3", 3-7/16", 3-1/2", 3-11/16", 3-3/4" — — — — — — — McMaster-Carr: mounting-stud center-to-center options (in) — 2", 3", 3-3/4", 4", 4-1/4", 4-1/2", 5", 6" — — — — — — — McMaster-Carr: thread size options — — 2-56, 3-56, 4-40, 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 5/8-11 — — — — — — Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Elesa+Ganter: GN 426.5 cabinet U-handles, stainless steel: d1 20 / 28, l1 200 to 400, thread, d3, h, l2, r, t1 / t2 (types A and B) — web — Maker datasheet; numbers only. The sheet's text has 10 values per row against 9 labelled columns — https://www.elesa-ganter.com/siteassets/PDF/EN/GN 426.5.pdf - Elesa+Ganter (via a datasheet host): GN 426 aluminum cabinet U-handles: d1 20 / 28, length l (±0.25), thread M8 / M10 — web — Maker datasheet; only d1, length and thread are used (other columns unlabelled) — https://datasheet.sic-components.com/426_1.pdf - McMaster-Carr: Pull handles (mounting-hole center-to-center options) (free STEP/IGES per part, for your own design use; no redistribution) — STEP, IGES, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/pull-handles No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned. API: https://xemstudio.com/api/geometry?object=u-handles-gn-426-pull-handles