VESA mount hole patterns: 75, 100, 200×100, 200×200, 400×200 — dimension sheet
Source: Xem Studio, https://xemstudio.com/objects/vesa-mount-patterns/  (CC BY 4.0)
Basis: VESA FDMI (MIS-D/E/F) hole patterns and screw sizes
Catalog version: 2026-10-20

Sizes: see table below
- MIS-D: 75 × 75 and 100 × 100 mm, M4 screws (10 mm typical). MIS-E: 200 × 100, M4. MIS-F: 200 × 200 and up, M6 or M8 (TVs over 50 in commonly M8).
- Printed adapters: Ø4.5 holes for M4, Ø6.5 for M6; 5 mm of PETG with heat-set inserts holds a monitor; use the steel plate for anything over 10 kg.
- Files are 3 mm test plates with the pattern, for checking against the back of the display.

pattern  x_mm  y_mm  screw  typical_load
MIS-D 75  75  75  M4  to 14 kg
MIS-D 100  100  100  M4  to 14 kg
MIS-E 200×100  200  100  M4  to 22 kg
MIS-F 200×200  200  200  M6  to 50 kg
MIS-F 400×200  400  200  M6 / M8  to 50 kg+

Files elsewhere (not hosted by Xem Studio; license as stated by the publisher):
- Wikipedia: Flat Display Mounting Interface — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Flat_Display_Mounting_Interface
- McMaster-Carr: Monitor mounts (free STEP/IGES/STL per part, for your own design use; no redistribution) — STEP, IGES, STL, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/monitor-arms/

Free files (CC BY 4.0, Xem Studio; STEP + STL, 5 parts): https://xemstudio.com/files/hardware/vesa-mount-patterns/index.json
API: https://xemstudio.com/api/geometry?object=vesa-mount-patterns