# 3D printable 45° wedge slider: converts up/down motion to left/right (cam slider, STL, STEP)

> What mechanism turns a push up and down into a slide left and right?

- Category: Mechanisms › Cams
- Kind: Hardware
- Basis: 45° wedge / cam slider: follower travel h = s·tan α, so 45° gives 1:1. Xem design, zero clearance.
- Page: https://xemstudio.com/objects/wedge-motion-converter/ · JSON: https://xemstudio.com/api/geometry?object=wedge-motion-converter · Plain text: https://xemstudio.com/objects/wedge-motion-converter/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 20.0 | 8.0 | 60.0 |

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths.
- Resize: Scale base radius and lift together: the motion law and the pressure angle stay the same. Raising lift alone steepens the pressure angle and the follower can jam.
- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.
- Vertical slider carries 45° ribs, 2 mm deep at 4 mm pitch; horizontal slider carries matching grooves.
- Run each bar in its own guide (vertical and horizontal); 1 mm down moves the other bar 1 mm sideways.
- Add 0.15–0.2 mm on the rib faces for FDM. Print flat, ribs up.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| rib faces | 45°, 2 mm deep, 4 mm pitch, zero clearance | the other slider | run | pair* |

## Sizes

| file | motion | overall mm |
|---|---|---|
| wedge-slider-vertical | up / down (input) | 20 × 8 × 60 |
| wedge-slider-horizontal | left / right (output) | 60 × 6 × 20 |

## Where the files are

- USPTO: [US 5099708 Adjustable rolling cam slider (45° slant faces convert vertical to horizontal action)](https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5099708) — web — Publisher's page; dimensions are facts
- FIRGELLI: [Wedge Cam Mechanism: How It Works, Formula h = s·tan(α)](https://www.firgelliauto.com/blogs/mechanisms/wedge-cam) — web — Publisher's page; dimensions are facts

## Free STEP/STL (2 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/mechanisms/wedge-motion-converter/index.json · license: https://xemstudio.com/files/mechanisms/wedge-motion-converter/LICENSE.md

- wedge-slider-vertical: [STEP](https://xemstudio.com/files/mechanisms/wedge-motion-converter/wedge-slider-vertical.step) · [STL](https://xemstudio.com/files/mechanisms/wedge-motion-converter/wedge-slider-vertical.stl) — Vertical slider: 20 × 60 mm bar with 45° ribs, 2 mm deep at 4 mm pitch; pushing it down drives the horizontal slider sideways
- wedge-slider-horizontal: [STEP](https://xemstudio.com/files/mechanisms/wedge-motion-converter/wedge-slider-horizontal.step) · [STL](https://xemstudio.com/files/mechanisms/wedge-motion-converter/wedge-slider-horizontal.stl) — Horizontal slider: 60 × 20 mm bar with matching 45° grooves, zero clearance; it moves left/right as the vertical slider moves up/down

## Questions

**How does a wedge convert vertical motion to horizontal?**

The 45° faces slide on each other: each mm down on one bar pushes the other bar one mm sideways (h = s·tan α).

**Why ribs instead of one wedge face?**

Many short 45° ribs keep the parts compact and spread the load, so the stroke stays in a small block.

**What clearance do the sliders need?**

These are zero clearance; add 0.15–0.2 mm on the rib faces and run each bar in a guide.

**Can I change the ratio?**

A shallower angle gives more force and less travel; 45° gives 1:1.

## Fits with

- [Print-in-place: linear slider on a dovetail rail with end stops (100 mm)](https://xemstudio.com/objects/print-in-place-dovetail-slider/)
- [Print-in-place: crank-and-slider linkage with captive pins](https://xemstudio.com/objects/print-in-place-crank-slider/)
- [Lewis side wedge 5 → 10 × 14 × 50, Ø6 pin hole](https://xemstudio.com/objects/lewis-side-wedge-5-10x14x50/)
- [Barrel (cylindrical) cam with pin follower](https://xemstudio.com/objects/barrel-cam-mechanism/)
