3D printable 45° wedge slider: converts up/down motion to left/right (cam slider, STL, STEP) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/wedge-motion-converter/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: 45° wedge / cam slider: follower travel h = s·tan α, so 45° gives 1:1. Xem design, zero clearance. Catalog version: 2026-10-20 Overall (mm): length 20.0, width 8.0, height 60.0 - Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. - Resize: Scale base radius and lift together: the motion law and the pressure angle stay the same. Raising lift alone steepens the pressure angle and the follower can jam. - Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up. - Vertical slider carries 45° ribs, 2 mm deep at 4 mm pitch; horizontal slider carries matching grooves. - Run each bar in its own guide (vertical and horizontal); 1 mm down moves the other bar 1 mm sideways. - Add 0.15–0.2 mm on the rib faces for FDM. Print flat, ribs up. file motion overall mm wedge-slider-vertical up / down (input) 20 × 8 × 60 wedge-slider-horizontal left / right (output) 60 × 6 × 20 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - USPTO: US 5099708 Adjustable rolling cam slider (45° slant faces convert vertical to horizontal action) — web — Publisher's page; dimensions are facts — https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5099708 - FIRGELLI: Wedge Cam Mechanism: How It Works, Formula h = s·tan(α) — web — Publisher's page; dimensions are facts — https://www.firgelliauto.com/blogs/mechanisms/wedge-cam Free files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/mechanisms/wedge-motion-converter/index.json API: https://xemstudio.com/api/geometry?object=wedge-motion-converter