Wing nuts: DIN 315 M4–M24 and ASME B18.17 #4 to 3/4 — boss, wing spread, height, wing thickness — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/wing-nuts-din-315-asme-b18-17/ (sheet CC BY 4.0) Basis: fasten.it DIN 315 table (cross-checked against HB Bolt's metric cut sheet), a cold-forged wing nut sheet citing ASME B18.17, and McMaster-Carr's wing-nut tables as printed; numbers only Catalog version: 2026-10-20 Sizes: see table below - DIN 315 rows are the fasten.it table for round-wing wing nuts, product class C, M4 to M24, in mm: boss diameter D1, wing span e, overall height h, wing thickness g, and the dimension m, each max / min. The page does not define the letters beyond their position in the table, so the column names here follow the table, not an interpretation. HB Bolt's cut sheet (boss diameter, wing spread, wing height, max) agrees with fasten.it for M4, M5, M6, M8, M10, M16 and M20 (8 / 20 / 10.5, 11 / 26 / 13, 13 / 33 / 17, 16 / 39 / 20, 20 / 51 / 25, 29 / 73 / 37.5, 35 / 90 / 46.5). For M12 HB Bolt prints a wing height max of 33.5 mm and fasten.it 35.5 mm, so both are noted and the fasten.it figure (h min 31) is the one shown. HB Bolt also prints an M14 row identical to its M16 row; M14 is not in the fasten.it table and is left out. - ASME B18.17 rows are a cold-forged wing nut table (inches, max / min) with the sheet's own letters: A wing spread, B wing height, C wing thickness, D opening between wings, E boss diameter, G boss height. The sheet lists two thread series per size (coarse and fine, shown as TPI). The text read does not say 'Type A' or 'Type B', and no Type B (hot-forged) table was found, so Type A / Type B are not labelled and Type B is not on this page. - McMaster-Carr rows are what McMaster prints on its wing-nut category page: 'Wd.' as wing spread, 'Ht.' as height and 'Base Dia.' as boss diameter, steel styles 4, 5 and iron styles 5, 8. They are not B18.17 limits: for example a 1/4-20 style 4 is 1-1/8 in wide against a B18.17 wing spread of 0.97–1.10 in, so McMaster's styles are other wing forms; use McMaster's drawing for its own parts. - DIN 315 is a wing nut with round wings; edged wings are DIN 314 and are not on this page. Material, plating and thread class are not given in the tables used. - No file: the wing outline is not published as numbers in any source read (only span, height, thickness and boss), so a drawing would be invented. McMaster-Carr sells wing nuts with per-part STEP; linked, not copied. standard size pitch / TPI boss dia (D1 | E) wing spread (e | A) height (h | B) wing thickness (g | C) boss (m | G) between wings (D, ASME only) unit DIN 315 (round wing, German form) M4 0.7 mm 8 / 6 20 / 18 10.5 / 8.5 1.9 / 1.1 4.6 / 3.2 — mm (max / min) DIN 315 (round wing, German form) M5 0.8 mm 11 / 8 26 / 24 13 / 11 2.3 / 1.5 6.5 / 4 — mm (max / min) DIN 315 (round wing, German form) M6 1 mm 13 / 10 33 / 30 17 / 15 2.3 / 1.5 8 / 5 — mm (max / min) DIN 315 (round wing, German form) M8 1.25 mm 16 / 13 39 / 36 20 / 18 2.8 / 2 10 / 6.5 — mm (max / min) DIN 315 (round wing, German form) M10 1.5 mm 20 / 17 51 / 48 25 / 23 4.4 / 3.6 12 / 8 — mm (max / min) DIN 315 (round wing, German form) M12 1.75 mm 23 / 20 65 / 62 35.5 / 31 4.9 / 4.1 14 / 10 — mm (max / min) DIN 315 (round wing, German form) M16 2 mm 29 / 26 73 / 70 37.5 / 35 6.4 / 5.6 17 / 13 — mm (max / min) DIN 315 (round wing, German form) M20 2.5 mm 35 / 32 90 / 86 46.5 / 44 6.9 / 6.1 21 / 16 — mm (max / min) DIN 315 (round wing, German form) M24 3 mm 44 / 41 110 / 106 56.5 / 53.5 9.4 / 8.6 25 / 20 — mm (max / min) ASME B18.17 cold-forged (table as read) #4 40 & 48 TPI 0.33 / 0.29 0.72 / 0.59 0.41 / 0.28 0.11 / 0.07 0.14 / 0.10 0.21 / 0.17 in (max / min) ASME B18.17 cold-forged (table as read) #6 32 & 40 TPI 0.33 / 0.29 0.72 / 0.59 0.41 / 0.28 0.11 / 0.07 0.14 / 0.10 0.21 / 0.17 in (max / min) ASME B18.17 cold-forged (table as read) #8 32 & 36 TPI 0.43 / 0.39 0.91 / 0.78 0.47 / 0.34 0.14 / 0.10 0.18 / 0.14 0.27 / 0.22 in (max / min) ASME B18.17 cold-forged (table as read) #10 24 & 32 TPI 0.43 / 0.39 0.91 / 0.78 0.47 / 0.34 0.14 / 0.10 0.18 / 0.14 0.27 / 0.22 in (max / min) ASME B18.17 cold-forged (table as read) #12 24 & 28 TPI 0.50 / 0.45 1.10 / 0.97 0.57 / 0.43 0.18 / 0.14 0.22 / 0.17 0.33 / 0.26 in (max / min) ASME B18.17 cold-forged (table as read) 1/4 20 & 28 TPI 0.50 / 0.45 1.10 / 0.97 0.57 / 0.43 0.18 / 0.14 0.22 / 0.17 0.33 / 0.26 in (max / min) ASME B18.17 cold-forged (table as read) 5/16 18 & 24 TPI 0.58 / 0.51 1.25 / 1.12 0.66 / 0.53 0.21 / 0.17 0.25 / 0.20 0.39 / 0.32 in (max / min) ASME B18.17 cold-forged (table as read) 3/8 16 & 24 TPI 0.70 / 0.64 1.44 / 1.31 0.79 / 0.65 0.24 / 0.20 0.30 / 0.26 0.48 / 0.42 in (max / min) ASME B18.17 cold-forged (table as read) 7/16 14 & 20 TPI 0.93 / 0.86 1.94 / 1.81 1.00 / 0.87 0.33 / 0.26 0.39 / 0.35 0.65 / 0.54 in (max / min) ASME B18.17 cold-forged (table as read) 1/2 13 & 20 TPI 0.93 / 0.86 1.94 / 1.81 1.00 / 0.87 0.33 / 0.26 0.39 / 0.35 0.65 / 0.54 in (max / min) ASME B18.17 cold-forged (table as read) 5/8 11 & 18 TPI 1.19 / 1.13 2.76 / 2.62 1.44 / 1.31 0.40 / 0.34 0.55 / 0.51 0.90 / 0.80 in (max / min) ASME B18.17 cold-forged (table as read) 3/4 10 & 16 TPI 1.19 / 1.13 2.76 / 2.62 1.44 / 1.31 0.40 / 0.34 0.55 / 0.51 0.90 / 0.80 in (max / min) McMaster, steel, style 4 (as printed) 8-32 — 1/4" 1" 1/2" — — — as printed McMaster, steel, style 4 (as printed) 1/4-20 — 7/16" 1 1/8" 5/8" — — — as printed McMaster, steel, style 4 (as printed) 5/16-18 — 5/8" 1 1/2" 3/4" — — — as printed McMaster, steel, style 5 (as printed) 10-24 — 1/4" 1" 7/16" — — — as printed McMaster, steel, style 5 (as printed) 3/8-16 — 5/8" 1 5/8" 7/8" — — — as printed McMaster, steel, style 5 (as printed) 3/4-10 — 1 1/4" 3" 1 1/4" — — — as printed McMaster, iron, style 5 (as printed) M5 × 0.8 — 9.53 mm 28.6 mm 12.7 mm — — — as printed McMaster, iron, style 5 (as printed) M10 × 1.5 — 16 mm 41.3 mm 20.6 mm — — — as printed McMaster, iron, style 8 (as printed) 1/4-20 — 1" 3" 3/4" — — — as printed McMaster, iron, style 8 (as printed) 5/16-18 — 1" 3" 3/4" — — — as printed Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - fasten.it: DIN 315 Standard Dimensions for wing nuts, rounded wings (M4 to M24, product class C): P, D1, e, h, g, m (max / min), DIN 315:1998-07 — web — Reference page; numbers only. The page does not define the column letters — https://fasten.it/norms/norm/din_315 - HB Bolt: Metric wing nuts cut sheet: nominal diameter, thread pitch, boss diameter, wing spread, wing height (max), M4 to M20 (cross-check) — web — Maker cut sheet; numbers only — https://www.hbbolt.com/_Product_Cut_Sheets/WingNutMetric.pdf - Cold-forged wing nut sheet (hosted on a Shopify CDN, maker not named in the text read): Wing nuts, cold forged, ANSI/ASME B18.17: A wing spread, B wing height, C wing thickness, D between wings, E boss diameter, G boss height (max / min), sizes 4 to 3/4 — web — Maker datasheet; numbers only — https://cdn.shopify.com/s/files/1/0056/7856/3437/files/Nutsforgedwing.pdf - McMaster-Carr: Wing nuts (iron, steel, stainless) (free STEP/IGES per part, for your own design use; no redistribution) — STEP, IGES, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/iron-standard-wing-nuts - McMaster-Carr: Stainless steel wing nuts (free STEP/IGES per part, for your own design use; no redistribution) — STEP, IGES, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/stainless-steel-wing-nuts No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned. API: https://xemstudio.com/api/geometry?object=wing-nuts-din-315-asme-b18-17