Xem Studiomeasured geometryLibrary › Hardware › Bearings, rails & motion ·
Cam followers, stud type CF (IKO / THK): roller D × C, stud d, thread, stud length, CF 3 to CF 30-2 + STEP/STL
What are the dimensions of a CF stud-type cam follower (track roller): roller diameter, width, stud diameter, thread, stud length and overall length? · Standard part · basis: THK Cam Follower General Catalog (CF-A and CF-AB tables), cross-checked against IKO's CF table on every row; maker CAD not linked
Also called: cam follower dimensions, cf6 cam follower, cf8 cam follower, cf10 cam follower, cf12 cam follower, cf16 cam follower, cf20 cam follower, cf24 cam follower, stud track roller, cam roller bearing, needle roller cam follower, cam follower stud length, cf 6 dimensions, cam follower step, cam follower stl, iko cf, thk cf, mcgill cf cam follower, cf3 cam follower, cf5 cam follower, cf10-1, cf30 cam foll
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 18 in table
Notes
- A stud-type cam follower (CF series; also called a stud track roller, cam roller or bolt-on roller) is a needle- or ball-bearing roller on a threaded stud that runs on a cam, rail or track. You mount it by drilling a through hole for the stud and tightening a nut on the thread G; D is the outer ring (the part that touches the track), C its width, d the stud diameter (and thread major diameter).
- Table: THK's Cam Follower General Catalog (the CF-A table for 3 to 10 mm studs, the CF-AB table for 12 to 30 mm studs). B1 = B + B2 on every row. IKO's CF rows agree on d, D, C and the thread for every size (CF 3 and CF 4 from IKO's catalog PDF only; CF 5 to CF 30-2 from both IKO tables), and IKO's B1 equals THK's or is 0.1 to 0.2 mm larger (printed as 'max'). Both makers list the same CF 10-1, 12-1, 20-1, 24-1, 30-1 and 30-2 large-roller variants.
- Mounting hole: IKO's page recommends an H7 hole for the metric CF series (H6 for the CFS miniature series). IKO's mounting dimension f and maximum tightening torque are in its catalog; the f column here is THK's shoulder dimension for the same sizes (IKO's f for CF 5 is 9.3 min vs THK 9.7: treat f as a maker-specific value and check your maker). Hex sizes in brackets are THK's stainless-steel values.
- Files: eighteen envelope models, one per designation: outer ring Ø D × C at z 0 to C, then a stud drawn at Ø d from the ring face to the overall length B1 (the thread G is a plain cylinder at the nominal major diameter). The head collar, crowned or cylindrical ring profile, seals, hex socket depth and grease nipple are not published as numbers in the sources read and are not drawn. Use it to check a track clearance (ring D × C) and the stud hole and length (B1, B2, G1).
- Left out: yoke-type rollers (NATR / NUTR), the miniature CFS series, thrust (CFN) and eccentric (CFE) types, load ratings (track capacity is in the makers' catalogs) and the inch series. No maker CAD or McMaster link is given because no cam follower CAD page was returned by search; both IKO and THK publish CAD from their catalogs.
Cam followers, stud type CF (IKO / THK): roller D × C, stud d… size chart
| designation | stud d, mm | roller (outer ring) D, mm | ring width C, mm | thread G | thread length G1, mm | head length B, mm | overall length B1, mm | stud length B2, mm | C1, mm | hex socket H, mm (stainless) | shoulder f, mm | IKO B1 as printed, mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CF 3 | 3 | 10 | 7 | M3×0.5 | 5 | 8 | 17 | 9 | 0.5 | 2 (1.5) | 6.8 | — |
| CF 4 | 4 | 12 | 8 | M4×0.7 | 6 | 9 | 20 | 11 | 0.5 | 2.5 (2) | 8.6 | — |
| CF 5 | 5 | 13 | 9 | M5×0.8 | 7.5 | 10 | 23 | 13 | 0.5 | 3 (2.5) | 9.7 | 23 |
| CF 6 | 6 | 16 | 11 | M6×1 | 8 | 12 | 28 | 16 | 0.6 | 3 | 11 | 28.2 max |
| CF 8 | 8 | 19 | 11 | M8×1.25 | 10 | 12 | 32 | 20 | 0.6 | 4 | 13 | 32.2 max |
| CF 10 | 10 | 22 | 12 | M10×1.25 | 12 | 13 | 36 | 23 | 0.6 | 5 | 15 | 36.2 max |
| CF 10-1 | 10 | 26 | 12 | M10×1.25 | 12 | 13 | 36 | 23 | 0.6 | 5 | 15 | 36.2 max |
| CF 12 | 12 | 30 | 14 | M12×1.5 | 13 | 15 | 40 | 25 | 0.6 | 6 | 20 | 40.2 max |
| CF 12-1 | 12 | 32 | 14 | M12×1.5 | 13 | 15 | 40 | 25 | 0.6 | 6 | 20 | 40.2 max |
| CF 16 | 16 | 35 | 18 | M16×1.5 | 17 | 19.5 | 52 | 32.5 | 0.8 | 6 | 24 | 52.1 max |
| CF 18 | 18 | 40 | 20 | M18×1.5 | 19 | 21.5 | 58 | 36.5 | 0.8 | 6 | 26 | 58.1 max |
| CF 20 | 20 | 52 | 24 | M20×1.5 | 21 | 25.5 | 66 | 40.5 | 0.8 | 8 | 36 | 66.1 max |
| CF 20-1 | 20 | 47 | 24 | M20×1.5 | 21 | 25.5 | 66 | 40.5 | 0.8 | 8 | 36 | 66.1 max |
| CF 24 | 24 | 62 | 29 | M24×1.5 | 25 | 30.5 | 80 | 49.5 | 0.8 | 8 | 40 | 80.1 max |
| CF 24-1 | 24 | 72 | 29 | M24×1.5 | 25 | 30.5 | 80 | 49.5 | 0.8 | 8 | 40 | 80.1 max |
| CF 30 | 30 | 80 | 35 | M30×1.5 | 32 | 37 | 100 | 63 | 1 | 8 | 46 | 100 max |
| CF 30-1 | 30 | 85 | 35 | M30×1.5 | 32 | 37 | 100 | 63 | 1 | 8 | 46 | 100 max |
| CF 30-2 | 30 | 90 | 35 | M30×1.5 | 32 | 37 | 100 | 63 | 1 | 8 | 46 | 100 max |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| stud d | Ø3 to Ø30 (CF 3 to CF 30-2) | through hole in the mounting plate for the stud; IKO recommends H7 for the metric CF series | slide | cam-follower* |
| thread G | M3 to M30 (M3×0.5 to M30×1.5) | nut on the stud thread, length G1 in the table (plain cylinder in the file); hex socket H on the head or thread end | designed | cam-follower* |
| outer ring D × C | Ø10 × 7 to Ø90 × 35 | cam, rail or track surface the ring runs on; the track must clear D and the head collar | run | cam-follower* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| THK (catalog copy hosted by a distributor) | Cam Follower General Catalog: CF-A (hex socket head, 3 to 10 mm) and CF-AB (12 to 30 mm) dimension tables: D, C, G, G1, B, B1, B2, C1, H, f | web | Publisher's page; dimensions are facts |
| IKO (catalog PDF copy) | IKO cam followers: CF 3 to CF 30-2 BR rows: D, C, d1 and thread | web | Publisher's page; dimensions are facts |
| Aims Industrial (IKO distributor) | IKO CF..BUUR table: D, C, d1, thread, B1 (max) for CF5 to CF30-2; CF5 detail G1 7.5, B 10, B2 13, H 3 | web | Publisher's page; dimensions are facts |
| Coolen Bearings | IKO cam follower data: stud-hole fit (H7 metric CF, H6 miniature CFS) and track capacity | web | Publisher's page; dimensions are facts |
| BDS Bearing (IKO catalog CAT-57164 extract) | IKO cam followers CF 3 to CF 5 (D, C, d1, G, G1, mounting dimension f, torque) and CFS miniature | web | Publisher's page; dimensions are facts |
Free files
★ Free files 18 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
| cam-follower-cf3-d10x7-stud3x17 | CF 3 stud-type cam follower envelope: outer ring Ø10 × 7 mm (z 0 to 7); stud Ø3 to an overall length B1 17 mm, thread M3×0.5 drawn as a plain Ø3 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf4-d12x8-stud4x20 | CF 4 stud-type cam follower envelope: outer ring Ø12 × 8 mm (z 0 to 8); stud Ø4 to an overall length B1 20 mm, thread M4×0.7 drawn as a plain Ø4 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf5-d13x9-stud5x23 | CF 5 stud-type cam follower envelope: outer ring Ø13 × 9 mm (z 0 to 9); stud Ø5 to an overall length B1 23 mm, thread M5×0.8 drawn as a plain Ø5 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf6-d16x11-stud6x28 | CF 6 stud-type cam follower envelope: outer ring Ø16 × 11 mm (z 0 to 11); stud Ø6 to an overall length B1 28 mm, thread M6×1 drawn as a plain Ø6 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf8-d19x11-stud8x32 | CF 8 stud-type cam follower envelope: outer ring Ø19 × 11 mm (z 0 to 11); stud Ø8 to an overall length B1 32 mm, thread M8×1.25 drawn as a plain Ø8 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf10-d22x12-stud10x36 | CF 10 stud-type cam follower envelope: outer ring Ø22 × 12 mm (z 0 to 12); stud Ø10 to an overall length B1 36 mm, thread M10×1.25 drawn as a plain Ø10 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf10-1-d26x12-stud10x36 | CF 10-1 stud-type cam follower envelope: outer ring Ø26 × 12 mm (z 0 to 12); stud Ø10 to an overall length B1 36 mm, thread M10×1.25 drawn as a plain Ø10 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf12-d30x14-stud12x40 | CF 12 stud-type cam follower envelope: outer ring Ø30 × 14 mm (z 0 to 14); stud Ø12 to an overall length B1 40 mm, thread M12×1.5 drawn as a plain Ø12 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf12-1-d32x14-stud12x40 | CF 12-1 stud-type cam follower envelope: outer ring Ø32 × 14 mm (z 0 to 14); stud Ø12 to an overall length B1 40 mm, thread M12×1.5 drawn as a plain Ø12 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf16-d35x18-stud16x52 | CF 16 stud-type cam follower envelope: outer ring Ø35 × 18 mm (z 0 to 18); stud Ø16 to an overall length B1 52 mm, thread M16×1.5 drawn as a plain Ø16 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf18-d40x20-stud18x58 | CF 18 stud-type cam follower envelope: outer ring Ø40 × 20 mm (z 0 to 20); stud Ø18 to an overall length B1 58 mm, thread M18×1.5 drawn as a plain Ø18 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf20-d52x24-stud20x66 | CF 20 stud-type cam follower envelope: outer ring Ø52 × 24 mm (z 0 to 24); stud Ø20 to an overall length B1 66 mm, thread M20×1.5 drawn as a plain Ø20 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf20-1-d47x24-stud20x66 | CF 20-1 stud-type cam follower envelope: outer ring Ø47 × 24 mm (z 0 to 24); stud Ø20 to an overall length B1 66 mm, thread M20×1.5 drawn as a plain Ø20 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf24-d62x29-stud24x80 | CF 24 stud-type cam follower envelope: outer ring Ø62 × 29 mm (z 0 to 29); stud Ø24 to an overall length B1 80 mm, thread M24×1.5 drawn as a plain Ø24 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf24-1-d72x29-stud24x80 | CF 24-1 stud-type cam follower envelope: outer ring Ø72 × 29 mm (z 0 to 29); stud Ø24 to an overall length B1 80 mm, thread M24×1.5 drawn as a plain Ø24 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf30-d80x35-stud30x100 | CF 30 stud-type cam follower envelope: outer ring Ø80 × 35 mm (z 0 to 35); stud Ø30 to an overall length B1 100 mm, thread M30×1.5 drawn as a plain Ø30 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf30-1-d85x35-stud30x100 | CF 30-1 stud-type cam follower envelope: outer ring Ø85 × 35 mm (z 0 to 35); stud Ø30 to an overall length B1 100 mm, thread M30×1.5 drawn as a plain Ø30 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
| cam-follower-cf30-2-d90x35-stud30x100 | CF 30-2 stud-type cam follower envelope: outer ring Ø90 × 35 mm (z 0 to 35); stud Ø30 to an overall length B1 100 mm, thread M30×1.5 drawn as a plain Ø30 cylinder; head, crown, seals, hex socket and grease nipple not drawn (no numbers published for them); nominal values | STEP · STL |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=cam-followers-stud-type-cf
Fits with
Free
Ball bearings, 683 to 6210 and flanged F6xx (ISO 15)44 sizes★ 44 filesFree
Pillow block KP08 envelope with a 608 pocket5 sizes★ 1 fileFree
Metric shafts Ø3 to Ø10 with D-flats and clip grooves10 sizes★ 10 filesFreeV-Slot wheels and eccentric spacers: Delrin mini, Delrin and solid V wheels, 625 and 105ZZ bearings, 7.12 mm spacer hole7 sizes★ sheetFree
Roller follower Ø10 on a Ø3 pin2 sizes★ 1 fileFree
608 ball bearing7×22×22 mm★ 2 files
Questions
What size is a CF 6 cam follower?
Roller Ø16 × 11 wide, stud Ø6 with an M6 × 1 thread 8 mm long, head 12 mm, overall length 28 mm, stud length 16 mm, 3 mm hex socket (THK; IKO agrees on D, C and thread).
What is the difference between CF 10 and CF 10-1?
Same stud (M10 × 1.25, overall length 36) and ring width (12), but the CF 10-1 roller is Ø26 instead of Ø22.
What mounting hole does a CF cam follower need?
IKO recommends an H7 hole for the metric CF series (stud d is the nominal size); the thread is tightened with a nut. Sizes are in the table.
How long is a CF 12 stud?
40 mm overall (B1): 15 mm head plus 25 mm stud, of which 13 mm is thread (G1).