Xem Studiomeasured geometryLibrary › Tri-clamp & pipe › Pipe, tube & threads ·
Camlock (cam and groove) couplings: types A, B, C, D, E, F, DC, DP, 1/2 to 4 in sizes, adapter flange diameter
What are the camlock types A to F and the dimensions of the adapter? · Standard part · basis: A-A-59326D Table II (flange diameter B), Genebre datasheets 0440 / 0460 / 0470 (cross-check), Pathel catalogue (type definitions); numbers only
Also called: camlock size chart, type c camlock dimensions, camlock types a b c d e f, camlock dc dp, cam and groove adapter dimensions, camlock flange diameter, a-a-59326, mil-c-27487, en 14420-7, din 2828, camlock thread npt
Exact dimensions. True size, with no printing tolerance added.
- sizes
- 9 in table
Notes
- Cam and groove (camlock) couplings are specified in the US by Commercial Item Description A-A-59326D (supersedes MIL-C-27487); it numbers 22 coupling types with Roman numerals. The trade letters used on catalogs and here are: A adapter x female thread, B adapter x male thread, C coupler x hose shank, D coupler x female thread, E adapter x hose shank, F coupler x male thread, DC dust cap (fits a coupler), DP dust plug (fits an adapter).
- Adapter (male half) flange diameter is printed in A-A-59326D Table II as dimension B (equal to H); Genebre's datasheet D for the same sizes agrees within 0.3 mm for 3/4 to 4 in, so the number is cross-checked by two sources. The standard's 1/2 in half uses the same body as 3/4 in (1.264 in); Genebre's 1/2 in is a smaller 23.8 mm body.
- Threads are NPT unless a spec sheet says otherwise (A-A-59326D); the European range (Pathel) is BSPP for A and D, BSPT for B and F: the thread letter is not the coupling.
- Left out, no file: the groove profile of the adapter. Table II lists letters A to K (for 1-1/2 in: A 1.690, B 2.105, C .441, D .13, E .690, F 1.62, J .13, K .58 in), but the figure that says which letter is groove diameter, groove width or lip radius could not be read, so Xem does not publish a revolved adapter. Overall length depends on the type and the hose shank/thread: Genebre's L is listed for E, DC and DP only.
- Dust cap and plug have the same flange diameter as the adapter; cap/plug lengths are Genebre's L.
Camlock (cam and groove) couplings: types A, B, C, D, E, F, DC, DP… size chart
| size (in) | adapter flange dia B (A-A-59326D) | flange dia D (Genebre, mm) | agree | type E adapter length L (mm) | type E shank bore d (mm) | type DC cap length L (mm) | type DP plug length L (mm) |
|---|---|---|---|---|---|---|---|
| 1/2 | 1.264 in (32.11 mm) | 23.8 | no: Genebre 1/2 in is a smaller body | 73 | 12 | 37 | 35 |
| 3/4 | 1.264 in (32.11 mm) | 32.0 | yes (within 0.3 mm) | 88 | 19 | 44 | 38 |
| 1 | 1.446 in (36.73 mm) | 36.7 | yes (within 0.3 mm) | 97 | 25 | 50 | 43 |
| 1-1/4 | 1.792 in (45.52 mm) | 45.5 | yes (within 0.3 mm) | 113 | 31 | 59 | 55 |
| 1-1/2 | 2.105 in (53.47 mm) | 53.5 | yes (within 0.3 mm) | 118 | 38 | 59 | 55 |
| 2 | 2.484 in (63.09 mm) | 63.0 | yes (within 0.3 mm) | 136 | 51 | 66 | 62 |
| 2-1/2 | 2.985 in (75.82 mm) | 75.8 | yes (within 0.3 mm) | 140 | 65 | 66 | 62 |
| 3 | 3.604 in (91.54 mm) | 91.5 | yes (within 0.3 mm) | 153 | 76 | 71 | 62 |
| 4 | 4.708 in (119.58 mm) | 119.5 | yes (within 0.3 mm) | 162 | 100 | 75 | 65 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| US DoD / GSA via EverySpec | A-A-59326D Coupling halves, quick-disconnect, cam-locking (Commercial Item Description, 2011) | web | US Government work |
| Genebre | Camlock type E coupling, ref 0440 (D, L, d) | web | Publisher's page; dimensions are facts |
| Genebre | Camlock type DC coupling, ref 0460 (D, L) | web | Publisher's page; dimensions are facts |
| Genebre | Camlock type DP coupling, ref 0470 (D, L) | web | Publisher's page; dimensions are facts |
| Pathel | Camlock catalogue 2021 (types, threads) | web | Publisher's page; dimensions are facts |
Xem scan
File coming
No downloadable true-size file yet: the published figures do not fix the whole shape, and Xem never guesses a number. A measured scan is planned; request it and it moves up.
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=camlock-couplings
Fits with
Questions
What are the camlock types?
A adapter x female thread, B adapter x male thread, C coupler x hose shank, D coupler x female thread, E adapter x hose shank, F coupler x male thread, DC cap, DP plug.
What is the OD of a 2 in camlock adapter?
Flange diameter 2.484 in (63.1 mm) per A-A-59326D Table II; Genebre prints 63.0 mm.