Xem Studiomeasured geometry

Library › Hardware › Mechanism parts ·

Vertical spindle Ø12 × 100 with a Ø5 cross hole 35 mm up

What is the spindle of an edge-runner mill? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: mill spindle, vertical shaft, eje vertical del molino, Kollergangspindel

Exact dimensions. True size, with no printing tolerance added.

length
12.0 mm
width
12.0 mm
height
100.0 mm

Notes

  • Ø12 × 100 vertical spindle with a Ø5 cross hole 25 mm above the pan floor (the runners' radius): the horizontal axle passes through it, so turning the spindle carries the runners round the pan.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Vertical spindle Ø12 × 100 with a Ø5 cross hole 35 mm up size chart

dimensionvalue
spindleØ12 × 100 mm
cross holeØ5, 25 mm above the floor

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 375: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

edge-runner-spindle-d12x100spindle, axis Z, z −10..90, cross hole along X at z 25STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=edge-runner-spindle-d12x100

Vertical spindle Ø12 × 100 with a Ø5 cross hole 35 mm up, isometric render of a generated part
Render of edge-runner-spindle-d12x100 from the free STEP; not to scale.

Fits with

Edge-runner (chaser) mill: two rollers on one axle rolling round a pan, isometric render of a generated part
Edge-runner (chaser) mill: two rollers on one axle rolling round a pan4 sizes★ 1 file

Questions

What is the spindle of an edge-runner mill?

Ø12 × 100 vertical spindle with a Ø5 cross hole 25 mm above the pan floor (the runners' radius): the horizontal axle passes through it, so turning the spindle carries the runners round the pan.