Xem Studiomeasured geometry

Library › Hardware › Mechanism parts ·

Flat belt 10 × 1.5 for two cone pulleys at 110 mm (loop drawn at 20 mm along)

How does a belt sit on a cone? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: flat belt, cone belt, correa plana, Flachriemen

Exact dimensions. True size, with no printing tolerance added.

length
155.34 mm
width
51.34 mm
height
10.43 mm

Notes

  • 10 × 1.5 mm belt drawn 20 mm along the cones (Ø34 and Ø46), each section lying flat on the surface it touches; the strands twist between the two tilts. Inside length 345.99 mm.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Flat belt 10 × 1.5 for two cone pulleys at 110 mm size chart

dimensionvalue
width × thickness10 × 1.5 mm
inside length345.99 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 9: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

flat-belt-10x1-5-cone-pulleys-c110belt loop at z = 20STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=flat-belt-10x1-5-cone-pulleys-c110

Flat belt 10 × 1.5 for two cone pulleys at 110 mm (loop drawn at 20 mm along), isometric render of a generated part
Render of flat-belt-10x1-5-cone-pulleys-c110 from the free STEP; not to scale.

Fits with

Cone pulleys (speed cones) for gradually varied speed, isometric render of a generated part
Cone pulleys (speed cones) for gradually varied speed5 sizes★ 1 file

Questions

How does a belt sit on a cone?

10 × 1.5 mm belt drawn 20 mm along the cones (Ø34 and Ø46), each section lying flat on the surface it touches; the strands twist between the two tilts. Inside length 345.99 mm.