Library › Hardware › Springs & flexures ·
3D printable flat springs: serpentine zig-zag flexure, soft, medium and firm (STL, STEP)
How do I 3D print a spring that actually works, without a coil? · Hardware · basis: Flat serpentine flexure spring (compliant mechanism); stiffness scales roughly with beam thickness cubed. Xem design.
Also called: 3d printable spring, printable spring stl, flat spring 3d print, serpentine flexure, zigzag spring cad, non coil spring
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- length
- 20.6 mm
- width
- 76.0 mm
- height
- 8.0 mm
Notes
- 6 turns, 5 mm pitch, 14 mm amplitude, 8 mm tall, 8 mm end tabs with 3.2 mm (M3) holes.
- Relative stiffness: soft 0.3×, medium 1×, firm 2.4×.
- Prints flat, no supports. Keep travel to 10–15 % of length; PETG or nylon for repeated cycles.
3D printable flat springs: serpentine zig-zag flexure, soft, medium… size chart
| file | beam t mm | overall mm |
|---|---|---|
| flat-spring-soft-t0.8 | 0.8 | 19.8 × 76 × 8 |
| flat-spring-medium-t1.2 | 1.2 | 20.2 × 76 × 8 |
| flat-spring-firm-t1.6 | 1.6 | 20.6 × 76 × 8 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| end tabs | M3 holes (3.2 mm) | M3 screw or pin | designed | all |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| BYU Compliant Mechanisms Research Group | Compliant Mechanisms Explained | web | Publisher's page; dimensions are facts |
| BYU ScholarsArchive | Merriam, E. G., Stiffness Reduction Strategies for Additively Manufactured Compliant Mechanisms | web | Publisher's page; dimensions are facts |
Free files
★ Free files 3 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| flat-spring-soft-t0.8 | Flat serpentine spring, soft: 0.8 mm beam, 8 mm wide, 6 turns at 5 mm pitch, 14 mm amplitude, M3 tab holes at both ends | STEP · STL |
| flat-spring-medium-t1.2 | Flat serpentine spring, medium: 1.2 mm beam, 8 mm wide, 6 turns at 5 mm pitch, 14 mm amplitude, M3 tab holes at both ends | STEP · STL |
| flat-spring-firm-t1.6 | Flat serpentine spring, firm: 1.6 mm beam, 8 mm wide, 6 turns at 5 mm pitch, 14 mm amplitude, M3 tab holes at both ends | STEP · STL |
https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=flat-serpentine-springs

Fits with





Questions
Can you 3D print a working spring?
Yes. A flat serpentine prints with no supports and flexes along its length; coils print poorly and break between layers.
How do I make it stiffer or softer?
Stiffness goes roughly with thickness cubed: 1.6 mm is about 2.4× the 1.2 mm, 0.8 mm about a third of it.
What material is best?
PETG or nylon for repeated flexing. PLA works for light, occasional use but creeps.
How far does it stretch?
Keep travel to about 10–15% of the spring length for long life.