Library › Storage systems › Pelican cases ·

Pelican 1010 Micro Case: interior and exterior dimensions, insert-design envelope (STEP, STL)

What are the inside dimensions of a Pelican 1010 so I can design an insert for it? · Modern device · basis: Pelican 1010 Micro Case published specification (pelican.com).

Also called: pelican 1010, pelican 1010 dimensions, pelican 1010 interior dimensions, pelican 1010 insert, 1010 case, pelican micro 1010, 1010 micro case

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
149.35 mm
width
103.12 mm
height
53.85 mm

Notes

  • Interior (L × W × D): 111.0 × 72.9 × 42.67 mm; exterior: 149.35 × 103.12 × 53.85 mm.
  • Depth split: lid depth 17.53 mm, bottom depth 23.88 mm.
  • Inserts: subtract your print clearance (about 1–2 mm per side) from the interior size; the walls are drafted and the corners are rounded, so check the corner fit.
  • Corner radii, latch, hinge and handle geometry are not published and not modelled.

Pelican 1010 Micro Case: interior and exterior dimensions… size chart

dimensioninchesmm
interior length4.37111.0
interior width2.8772.9
interior depth1.6842.67
exterior length5.88149.35
exterior width4.06103.12
exterior depth2.1253.85
lid depth0.6917.53
bottom depth0.9423.88

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
interior cavity111.0 × 72.9 × 42.67 mminsert, divider or foamslideinterior*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Pelican1010 Micro Case — specificationswebPublisher's page; dimensions are facts
Pelican1010 Micro Case — spec sheetwebPublisher's page; dimensions are facts

Free files

★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
pelican-1010-micro-exteriorClosed case outside envelope 149.35 × 103.12 × 53.85 mm (square corners: radii not published)STEP · STL
pelican-1010-micro-interiorUsable interior volume 111.0 × 72.9 × 42.67 mm: design inserts, dividers and foam to thisSTEP · STL
Let your AI pull this. Claude: add Xem in one click. ChatGPT, Cursor or any MCP client: add https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=pelican-1010-micro-case

Pelican 1010 Micro Case: interior and exterior dimensions, insert-design envelope (STEP, STL), isometric render of a generated part
Render of pelican-1010-micro-interior from the free STEP; not to scale.

Fits with

Questions

What are the Pelican 1010 interior dimensions?

4.37 × 2.87 × 1.68 in (111.0 × 72.9 × 42.67 mm), per Pelican.

What are the Pelican 1010 exterior dimensions?

5.88 × 4.06 × 2.12 in (149.35 × 103.12 × 53.85 mm).

How much smaller should a printed insert be?

About 1–2 mm per side under the interior size, and round its corners: the case walls are drafted and the corners are radiused.