Xem Studiomeasured geometry

Library › Electronic components › Modules, sensors & displays ·

SparkFun VR IMU Breakout BNO086 (Qwiic): 30.48 × 25.40 mm board, 2 mounting holes and Qwiic connectors

What are the SparkFun Qwiic BNO086 IMU breakout dimensions and mounting-hole positions? · Modern device · basis: SparkFun's Eagle board file and Board Dimension drawing v10 for the VR IMU Breakout BNO086 Qwiic, with connector height from the JST SH datasheet.

Also called: SparkFun BNO086, sparkfun bno086, SparkFun VR IMU Breakout BNO086 Qwiic, Qwiic BNO086, BNO086 IMU breakout, SparkFun BNO08x breakout, BNO086 mounting holes

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
30.48 mm
width
25.4 mm
height
4.45 mm

Notes

  • Board 30.48 × 25.40 (1.20 × 1.00 in), 1.6 thick, square corners, centred, board bottom at 0.
  • Two Ø3.30 mounting holes at (±12.70, +10.16) from the board centre: 25.40 apart, both in the corners of one long edge, 2.54 in from the edges.
  • Qwiic (JST SH 4-pin) right-angle connectors centred on each short edge, openings facing outward; BNO086 IC at the board centre.
  • Modelled: board, holes, both Qwiic connectors and the IMU package. Not modelled: the unpopulated 0.1 in header pad rows.
  • All dimensions are exact nominal millimetres, true size, with no tolerance added.

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
Mounting holes2 × Ø3.30, 25.40 apartM3 or 4-40 screws and standoffsdesignedall
Qwiic connectorsJST SH 4-pin, 1.0 pitch, on both short edgesQwiic / STEMMA QT cablesdesignedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

SparkFunSparkFun VR IMU Breakout BNO086 Qwiic hardware repositorywebPublisher's page; dimensions are facts
SparkFunVR IMU Breakout BNO086 Qwiic board dimension drawing v10webPublisher's page; dimensions are facts
JSTSH connector datasheet (PDF)webPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

sparkfun-qwiic-bno086-imuSparkFun VR IMU Breakout BNO086 (Qwiic): 30.48 × 25.40 mm board, 2 mounting holes and Qwiic connectorsSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=sparkfun-qwiic-bno086-imu

SparkFun VR IMU Breakout BNO086 (Qwiic): 30.48 × 25.40 mm board, 2 mounting holes and Qwiic connectors, isometric render of a generated part
Render of sparkfun-qwiic-bno086-imu from the free STEP; not to scale.

Fits with

opening
JST SH connector (1.0 mm pitch): wire, ratings, circuits8 sizes★ sheet
Adafruit STEMMA QT sensor breakouts (BME280, BNO055/085, VL53, SCD-40, AHT20, SHT40, IMUs, light, magnet, RTC…), isometric render of a generated part
Adafruit STEMMA QT sensor breakouts (BME280, BNO055/085, VL53, SCD-40, AHT20, SHT40, IMUs, light, magnet, RTC…)33 sizes★ 33 files
SparkFun Qwiic pHAT v2 for Raspberry Pi, isometric render of a generated part
SparkFun Qwiic pHAT v2 for Raspberry Pi65×30.5 mm★ 1 file
Threaded standoffs, M2.5 and M3 (hex and round), isometric render of a generated part
Threaded standoffs, M2.5 and M3 (hex and round)2 sizes★ 16 files
2.54 mm pin headers, 1×2 to 2×20, vertical and right-angle, isometric render of a generated part
2.54 mm pin headers, 1×2 to 2×20, vertical and right-angle30 sizes★ 30 files

Questions

How big is the SparkFun BNO086 breakout?

30.48 × 25.40 mm (1.2 × 1.0 in), 1.6 mm board, 4.45 mm tall over the Qwiic connectors.

Where are the BNO086 breakout mounting holes?

Two Ø3.30 holes 25.40 mm apart at (±12.70, +10.16) mm from the board centre.