Xem Studiomeasured geometry

Library › Fishing › Rod holders and mounts ·

TACO F31-1610 slotted traditional weld-on aluminium rod holder (1-1/2 in ID x 8-1/2 in)

What are the dimensions of the TACO F31-1610 slotted traditional weld-on aluminium rod holder (1-1/2 in ID x 8-1/2 in)? · Modern device · basis: Manufacturer specifications (TACO Marine)

Also called: taco f31-1610, taco slotted rod holder, taco weld on rod holder dimensions, 1-1/2 inch rod holder, weld on rod holder size, aluminum rod holder 8.5 inch, portacañas soldable taco, rutenhalter zum anschweißen, porta vara soldável

Exact dimensions. True size, with no printing tolerance added.

length
38.1 mm
width
38.1 mm
height
215.9 mm

Notes

  • TACO's spec sheet gives the F31-1610 as a 1-1/2 in ID, 8-1/2 in long weld-on aluminium holder with a slotted liner and welded I-beam cross pin.
  • The cylinder is the inside bore (rod-butt clearance); tube wall, slot and pin are not dimensioned.
  • True size, no printing tolerance added. Only published numbers are used; anything not published is said so.

TACO F31-1610 slotted traditional weld-on aluminium rod holder size chart

dimensionvalue
Inside diameter38.1 mm (1-1/2 in)
Length215.9 mm (8-1/2 in)
InsertWhite slotted vinyl liner
BladeBladeless
FinishPolished, Brite Dip anodised
Outside diameter / slot / pinnot published

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

TACO MarineSpec sheet F31-1610 Slotted Traditional Weld-On Aluminum Rod HolderwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

taco-f31-1610-slotted-weld-on-rod-holder-envelopeEnvelope Ø38.1 × 215.9 mm (Inside diameter x length (OD not published))STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=taco-f31-1610-slotted-weld-on-rod-holder

TACO F31-1610 slotted traditional weld-on aluminium rod holder (1-1/2 in ID x 8-1/2 in), isometric render of a generated part
Render of taco-f31-1610-slotted-weld-on-rod-holder-envelope from the free STEP; not to scale.

Fits with

Attwood Standard Series flush-mount rod holder (2 in x 7-1/2 in, 0/15/30 degree), isometric render of a generated part
Attwood Standard Series flush-mount rod holder (2 in x 7-1/2 in, 0/15/30 degree)50.8×50.8×190.5 mm★ 1 file
Attwood closed-end flush-mount rod holder (2 in x 9 in, 66470/66471), isometric render of a generated part
Attwood closed-end flush-mount rod holder (2 in x 9 in, 66470/66471)50.8×50.8×228.6 mm★ 1 file
Scotty 244 flush deck mount (rod holder base), isometric render of a generated part
Scotty 244 flush deck mount (rod holder base)101.6×50.8×50.8 mm★ 2 files
TACO F31-2230 flared weld-on rod holder (1-3/4 in ID x 9-3/4 in), isometric render of a generated part
TACO F31-2230 flared weld-on rod holder (1-3/4 in ID x 9-3/4 in)44.45×44.45×247.65 mm★ 1 file

Questions

What is the bore of the TACO F31-1610?

1-1/2 in (38.1 mm) inside diameter, 8-1/2 in (215.9 mm) long.