Xem Studiomeasured geometry

Library › Hardware › Tri-clamp end cap with 608 bearing towers for a Ø8 shaft, 1.5, 2 and…

2 in crank frame

2 in crank frame: ISO 2852 cap face (clamps to the spool with a stock clamp), Ø28 con-rod window, two towers with 608 pockets for a Ø8 crankshaft 34 mm above the face, 21 mm between towers

Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.

STEP STL free, CC BY 4.0 (credit "Xem Studio")

Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

From the full sheet

Tri-clamp end cap with 608 bearing towers for a Ø8 shaft, 1.5, 2 and 3 in: every size, notes, mating features and sources. What tri-clamp cap carries an 8 mm shaft on 608 bearings?

Other sizes