Xem Studiomeasured geometryLibrary › Hardware › Tri-clamp dome lids: 1½ to 12 in, plain or with a port at the crown
8 in dome lid with a 1½ in clamp port at the crown, 68.3 from the face to the port face
8 in dome lid with a 1½ in clamp port at the crown, 68.3 from the face to the port face
Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, CC BY 4.0 (credit "Xem Studio")
Dimensions
| size_in | 1½ |
|---|---|
| tube_od_mm | 38.1 |
| dome_height_mm | 6.5 |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
Tri-clamp dome lids: 1½ to 12 in, plain or with a port at the crown: every size, notes, mating features and sources. Is there a domed tri-clamp lid with a port on top?
Other sizes
- 1½ in dome lid (F&D head), 14.6 from the face to the crown
- 2 in dome lid (F&D head), 16.9 from the face to the crown
- 2 in dome lid with a ½ NPT half coupling at the crown (tap-drill bore Ø18.3)
- 3 in dome lid (F&D head), 21.4 from the face to the crown
- 3 in dome lid with a ½ NPT half coupling at the crown (tap-drill bore Ø18.3)
- 4 in dome lid (F&D head), 26.2 from the face to the crown
- 4 in dome lid with a ½ NPT half coupling at the crown (tap-drill bore Ø18.3)
- 4 in dome lid with a 1½ in clamp port at the crown, 51.6 from the face to the port face
- 6 in dome lid (F&D head), 34.3 from the face to the crown
- 6 in dome lid with a 1½ in clamp port at the crown, 59.7 from the face to the port face
- 8 in dome lid (F&D head), 42.9 from the face to the crown
- 10 in dome lid (F&D head), 51.5 from the face to the crown
- 10 in dome lid with a 1½ in clamp port at the crown, 76.9 from the face to the port face
- 12 in dome lid (F&D head), 60.1 from the face to the crown
- 12 in dome lid with a 1½ in clamp port at the crown, 85.5 from the face to the port face