Xem Studiomeasured geometryLibrary › Hardware › Open frame for a 2 in tri-clamp ferrule: base, flexure seats, clamp…
stator sleeve
stator sleeve: bore Ø48.00 × 66 (the magnet carrier's running gap), Ø50.8 outside under the stator teeth, lower flange Ø80 × 5 with 3 × Ø3.4 on r 36, 45° cone to the Ø64 top flange (the bobbin's Ø65 bore passes over it), 3 × M3 tapped (Ø2.5 × 8) in the top on r 28.5
Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, CC BY 4.0 (credit "Xem Studio")
Dimensions
| part | la-frame-stator-sleeve-48x66 |
|---|---|
| what it is | stator sleeve |
| size_mm | Ø80 × 66, bore Ø48.00 |
| fits | OD Ø50.8: clamp (stator teeth); bore Ø48.00: designed (0.5 radial gap to the Ø47 carrier) |
| qty | 1 |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
Open frame for a 2 in tri-clamp ferrule: base, flexure seats, clamp rings, Ø66 sleeve and top plate: every size, notes, mating features and sources. What open frame holds flexure leaves above a 2 inch tri-clamp ferrule?