Xem Studiomeasured geometryLibrary › Hardware › Parallel-plate heat exchangers for 1.5, 2 and 3 in tri-clamp spools
cold heat exchanger for the 1.5 in spool
cold heat exchanger for the 1.5 in spool: Ø34.8 × 10 disc (the spool bore, exact), 1 mm outer ring, 0.4 mm plates at 1.4 mm pitch with 1 mm gas gaps (the spiral stack's channel); goes on the cold face of the stack
Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, CC BY 4.0 (credit "Xem Studio")
Dimensions
| spool | 1.5 |
|---|---|
| bore_mm (= exchanger OD) | 34.8 |
| length_mm | 10.0 |
| ring_mm | 1.0 |
| plate_mm | 0.4 |
| gap_mm | 1.0 |
| pitch_mm | 1.4 |
| plates | 23 |
| open_area_pct | 63.5 |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
Parallel-plate heat exchangers for 1.5, 2 and 3 in tri-clamp spools: every size, notes, mating features and sources. What parallel-plate heat exchanger fits inside a tri-clamp spool?