Xem Studiomeasured geometryLibrary › Hardware › Slotted fin inserts for a 2 in tri-clamp bore
heater insert (optional)
heater insert (optional): Ø41.5 / Ø47.5 × 68.05, 36 slots 1.5 × 2.5 deep in the OD, full length; on the liner's lower end, OD against the hot wall
Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, CC BY 4.0 (credit "Xem Studio")
Dimensions
| insert | heater |
|---|---|
| id_mm | 41.5 |
| od_mm | 47.5 |
| length_mm | 68.05 |
| slots | 36 |
| slot_mm | 1.5 × 2.5 |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
Slotted fin inserts for a 2 in tri-clamp bore (heater and cooler sleeves): every size, notes, mating features and sources. What fin insert adds heat-transfer area inside a 2 inch tri-clamp bore?