Xem Studiomeasured geometryLibrary › Hardware › Tri-clamp thermowells: 1½ and 2 in clamp, 2½ to 12 in insertion, ½…
1–1½ in clamp thermowell, 2.5 in insertion below the face
1–1½ in clamp thermowell, 2.5 in insertion below the face: Ø9.53 well, Ø6.6 bore for a ¼ in stem, ½ FNPT on top
Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, CC BY 4.0 (credit "Xem Studio")
Dimensions
| clamp | 1–1½ |
|---|---|
| insertion_in | 2.5 |
| insertion_mm | 63.5 |
| well_od_mm | 9.53 |
| bore_mm | 6.6 |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
Tri-clamp thermowells: 1½ and 2 in clamp, 2½ to 12 in insertion, ½ NPT top: every size, notes, mating features and sources. What thermowell fits a 1½ inch tri-clamp port?
Other sizes
- 1–1½ in clamp thermowell, 4 in insertion below the face
- 1–1½ in clamp thermowell, 6 in insertion below the face
- 1–1½ in clamp thermowell, 9 in insertion below the face
- 1–1½ in clamp thermowell, 12 in insertion below the face
- 2 in clamp thermowell, 2.5 in insertion below the face
- 2 in clamp thermowell, 4 in insertion below the face
- 2 in clamp thermowell, 6 in insertion below the face
- 2 in clamp thermowell, 9 in insertion below the face
- 2 in clamp thermowell, 12 in insertion below the face