Xem Studiomeasured geometryLibrary › Hardware › Tri-clamp vessels ·
Tri-clamp vessel, 2 in: closed-bottom pots 2 to 24 in deep (flat, dished, round)
What sizes of 2 inch tri-clamp pot or closed-end spool are there? · Hardware · basis: Xem Studio design: 2 in sanitary tube Ø50.8 × 1.65 with an ISO 2852 clamp face on top and a welded bottom — flat plate (tube-wall thick), flanged-and-dished (crown R = OD, knuckle 6 %) or hemispherical
Also called: 2 inch tri clamp pot, 2 in tri clamp vessel, 2 inch tri clamp closed end, 2 x 12 tri clamp, tri clamp dish 2 inch, tri clamp cup 2 inch, 2 inch tri clamp fermenter, recipiente tri clamp 2 pulgadas, Tri-Clamp Behälter 2 Zoll
Exact dimensions. True size, with no printing tolerance added.
- sizes
- 9 in table
Notes
- A 2 in tri-clamp pot: one clamp face, closed bottom. Depth is measured from the clamp face to the outside of the bottom; capacity is to the face plane.
- Every size here is the actual size of the metal part, with no printing allowance. The printable 45° version is printable-tri-clamp-vessel-2in.
- Close it with any cap, dome lid or ported cap of the same size, a clamp and a gasket.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.
Tri-clamp vessel, 2 in: closed-bottom pots 2 to 24 in deep size chart
| depth (in) | depth (mm) | flat L | dished L | round L |
|---|---|---|---|---|
| 2 | 50.8 | 0.09 | 0.08 | 0.07 |
| 3 | 76.2 | 0.13 | 0.13 | 0.12 |
| 4 | 101.6 | 0.18 | 0.17 | 0.16 |
| 6 | 152.4 | 0.27 | 0.26 | 0.25 |
| 8 | 203.2 | 0.36 | 0.35 | 0.34 |
| 10 | 254.0 | 0.45 | 0.44 | 0.43 |
| 12 | 304.8 | 0.54 | 0.53 | 0.52 |
| 18 | 457.2 | 0.81 | 0.8 | 0.79 |
| 24 | 609.6 | 1.08 | 1.07 | 1.06 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| ASME | Flanged and dished (F&D) heads: crown radius = OD, knuckle radius 6 % of OD (BPVC Section VIII torispherical head) | standard | ASME; proportions are facts verify |
| GW Kent | Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness | web | publisher's guide; dimensions cited |
| Rubber Fab | Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676) | publisher's chart; dimensions cited, nothing copied | |
| Rubber Fab | Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) | maker chart; dimensions are facts verify |
Free files
★ Free files 27 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
| vessel-2in-x-2in-flat | 2 × 2 in, flat bottom: 50.8 mm face to bottom, holds 0.09 L to the face | STEP · STL |
| vessel-2in-x-2in-dished | 2 × 2 in, dished bottom: 50.8 mm face to bottom, holds 0.08 L to the face | STEP · STL |
| vessel-2in-x-2in-round | 2 × 2 in, round bottom: 50.8 mm face to bottom, holds 0.07 L to the face | STEP · STL |
| vessel-2in-x-3in-flat | 2 × 3 in, flat bottom: 76.2 mm face to bottom, holds 0.13 L to the face | STEP · STL |
| vessel-2in-x-3in-dished | 2 × 3 in, dished bottom: 76.2 mm face to bottom, holds 0.13 L to the face | STEP · STL |
| vessel-2in-x-3in-round | 2 × 3 in, round bottom: 76.2 mm face to bottom, holds 0.12 L to the face | STEP · STL |
| vessel-2in-x-4in-flat | 2 × 4 in, flat bottom: 101.6 mm face to bottom, holds 0.18 L to the face | STEP · STL |
| vessel-2in-x-4in-dished | 2 × 4 in, dished bottom: 101.6 mm face to bottom, holds 0.17 L to the face | STEP · STL |
| vessel-2in-x-4in-round | 2 × 4 in, round bottom: 101.6 mm face to bottom, holds 0.16 L to the face | STEP · STL |
| vessel-2in-x-6in-flat | 2 × 6 in, flat bottom: 152.4 mm face to bottom, holds 0.27 L to the face | STEP · STL |
| vessel-2in-x-6in-dished | 2 × 6 in, dished bottom: 152.4 mm face to bottom, holds 0.26 L to the face | STEP · STL |
| vessel-2in-x-6in-round | 2 × 6 in, round bottom: 152.4 mm face to bottom, holds 0.25 L to the face | STEP · STL |
| vessel-2in-x-8in-flat | 2 × 8 in, flat bottom: 203.2 mm face to bottom, holds 0.36 L to the face | STEP · STL |
| vessel-2in-x-8in-dished | 2 × 8 in, dished bottom: 203.2 mm face to bottom, holds 0.35 L to the face | STEP · STL |
| vessel-2in-x-8in-round | 2 × 8 in, round bottom: 203.2 mm face to bottom, holds 0.34 L to the face | STEP · STL |
| vessel-2in-x-10in-flat | 2 × 10 in, flat bottom: 254.0 mm face to bottom, holds 0.45 L to the face | STEP · STL |
| vessel-2in-x-10in-dished | 2 × 10 in, dished bottom: 254.0 mm face to bottom, holds 0.44 L to the face | STEP · STL |
| vessel-2in-x-10in-round | 2 × 10 in, round bottom: 254.0 mm face to bottom, holds 0.43 L to the face | STEP · STL |
| vessel-2in-x-12in-flat | 2 × 12 in, flat bottom: 304.8 mm face to bottom, holds 0.54 L to the face | STEP · STL |
| vessel-2in-x-12in-dished | 2 × 12 in, dished bottom: 304.8 mm face to bottom, holds 0.53 L to the face | STEP · STL |
| vessel-2in-x-12in-round | 2 × 12 in, round bottom: 304.8 mm face to bottom, holds 0.52 L to the face | STEP · STL |
| vessel-2in-x-18in-flat | 2 × 18 in, flat bottom: 457.2 mm face to bottom, holds 0.81 L to the face | STEP · STL |
| vessel-2in-x-18in-dished | 2 × 18 in, dished bottom: 457.2 mm face to bottom, holds 0.80 L to the face | STEP · STL |
| vessel-2in-x-18in-round | 2 × 18 in, round bottom: 457.2 mm face to bottom, holds 0.79 L to the face | STEP · STL |
| vessel-2in-x-24in-flat | 2 × 24 in, flat bottom: 609.6 mm face to bottom, holds 1.08 L to the face | STEP · STL |
| vessel-2in-x-24in-dished | 2 × 24 in, dished bottom: 609.6 mm face to bottom, holds 1.07 L to the face | STEP · STL |
| vessel-2in-x-24in-round | 2 × 24 in, round bottom: 609.6 mm face to bottom, holds 1.06 L to the face | STEP · STL |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-vessel-2in
Fits with
Free
Tri-clamp vessel, 1½ in: closed-bottom pots 2 to 24 in deep (flat, dished, round)9 sizes★ 27 filesFree
Tri-clamp vessel, 3 in: closed-bottom pots 2 to 24 in deep (flat, dished, round)9 sizes★ 27 filesFree
Tri-clamp vessel, 4 in: closed-bottom pots 2 to 24 in deep (flat, dished, round)9 sizes★ 26 filesFree
Tri-clamp vessel, 6 in: closed-bottom pots 2 to 24 in deep (flat, dished, round)9 sizes★ 25 filesFree
Tri-clamp vessel, 8 in: closed-bottom pots 2 to 24 in deep (flat, dished, round)9 sizes★ 24 filesFree
Printable tri-clamp vessel, 2 in (45°): flat and cone-bottom pots up to 250 mm6 sizes★ 12 filesFree
Tri-clamp dome lids: 1½ to 12 in, plain or with a port at the crown8 sizes★ 16 filesFree
Tri-clamp end caps with ports: NPT, clamp nozzle, hose barb and airlock hole, 1½ to 8 in7 sizes★ 42 files
Questions
How much does a 2 × 12 in tri-clamp pot hold?
0.54 L with a flat bottom.
Which bottom should I choose?
Flat stands on a bench; dished (F&D) is the usual tank bottom and stands on a ring; round drains to one point.