Library › 3D printing › 3D printable bistable snap toggle: slider that clicks to either end…
50x40 mm, Base frame: 2 mm plate with sight window, perimeter wall with slider slots at both ends
50x40 mm: Base frame: 2 mm plate with sight window, perimeter wall with slider slots at both ends, four posts with 2.5 mm pilot holes for M3 self-tapping screws
Exact dimensions. True size, no tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, Xem Studio Design License — Xem Studio
Dimensions
| part | screws |
|---|---|
| 50 × 40 size mm | M3 × 8 self-tapping |
| 75 × 60 size mm | M3 × 8 self-tapping |
| qty | 4 |
Let your AI pull this. Claude: add Xem in one click. ChatGPT, Cursor or any MCP client: add
Set it up →https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
3D printable bistable snap toggle: slider that clicks to either end, curved leaf springs (STL, STEP): every size, notes, mating features and sources. Is there a 3D printable mechanism that snaps a slider to one of two positions and holds it there?
Other sizes
- 50x40 mm, Cover plate: same outline and window, four 3.2 mm screw clearance holes
- 50x40 mm, Slider: flat bar with a round boss at its middle that squeezes past the leaf springs
- 50x40 mm, Leaf spring: thin arc from post to post with a ring at each end, PETG or nylon
- 50x40 mm, All parts in place, cover closed
- 75x60 mm, Base frame: 2 mm plate with sight window, perimeter wall with slider slots at both ends
- 75x60 mm, Cover plate: same outline and window, four 3.2 mm screw clearance holes
- 75x60 mm, Slider: flat bar with a round boss at its middle that squeezes past the leaf springs
- 75x60 mm, Leaf spring: thin arc from post to post with a ring at each end, PETG or nylon
- 75x60 mm, All parts in place, cover closed