Library › Car design › Suspension geometry ·

Camber link length and position (RC)

Name: Camber link length and position (RC) dimension sheet
Creator: Xem Studio
License: https://creativecommons.org/licenses/by/4.0/

What does camber link length do on an RC car? · Standard part · basis: Design rules and figures from the cited sources; example geometry by Xem Studio

Also called: camber link, rc camber link length, upper link, turnbuckle position, camber gain rc, shock tower holes, camber link mounting, short camber link, long camber link

Exact dimensions. True size, with no printing tolerance added.

sizes: 3 in table

Notes

The camber link is the RC car's upper arm. Its length sets how fast camber changes with suspension travel, and its end positions set the roll centre (Tekno).
A shorter link gives more camber gain, more corner-entry steering and traction but less stability; a longer link gives less camber gain and more stability (Tekno). Lowering the inboard end or raising the outboard end increases chassis roll (CompetitionX).
The file is a reference example built by Xem Studio from the numbers above (Reference 1/10 touring car: wheelbase 260 mm (AARCMCC ISTC 250-270), track 190 mm (EFRA width without body), 50 mm = EFRA rim limit.). Sizes the sources do not fix are illustrative; scale the example to your own vehicle.

Camber link length and position size chart

parameter	value or range	source
Shorter link	more camber gain and steering, less stable	Tekno setup guide
Longer link	less camber gain, more stable	Tekno setup guide
Inboard lower / outboard higher	more chassis roll	CompetitionX quick guide

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Tekno RC	Tekno RC Setup Guide	web	Publisher's page; dimensions are facts
CompetitionX	RC Quick Setup Guide	web	Publisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

camber-link-length-geometry

roll centre demo: front axle, track 190 mm, Ø50 tyres, 0° (illustrative layout)

STEP · STL

Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.

Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=camber-link-length