Xem Studiomeasured geometryLibrary › Hardware › Framing ·
Cold-formed steel C-studs and joists (SSMA S sections): 162S125 to 1600S350, depth, flange, lip, thickness
What are the dimensions of an SSMA steel stud such as 362S162-54 (depth, flange, lip, thickness, bend radius)? · Standard part · basis: SFIA Technical Guide for Cold-Formed Steel Framing Products (Jan 2026): designation rules, stiffening lip table, thickness table with design inside corner radii; designation list from The Steel Network's Light Steel Framing Members catalog (Form 022015), whose lip and thickness tables are identical
Also called: 362s162-54 dimensions, 600s162-54, 362s125-18 stud size, ssma stud designation, metal stud dimensions, 20 gauge stud 3-5/8, 16 gauge 6 inch stud, steel stud lip size, steel stud inside bend radius, 33 mil stud thickness, c stud step file, cold formed c section
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- length
- 200.0 mm
Notes
- Designation DDDSFFF-MM: DDD = web depth in 1/100 in (362 = 3-5/8 in; 162 = 1-5/8 in), S = stud or joist with stiffening lips, FFF = flange width in 1/100 in (137 = 1-3/8, 162 = 1-5/8), MM = minimum base-metal thickness in mils. The design thickness (used for every dimension here) is the minimum / 0.95.
- The lip depends only on the flange: S125 3/16 in, S137 3/8, S162 1/2, S200 / S250 / S300 5/8, S350 1 in. The inside bend radius depends only on the thickness (SFIA thickness table). Web, flange and lip are out-to-out.
- Drawn areas match SFIA's published gross areas to the third decimal on all files checked (162S125-18 0.080 in², 362S162-33 0.262, 600S162-54 0.556, 600S200-68 0.764, 800S250-97 1.372, 1000S300-118 2.028).
- Cross-section shown as a 200 mm length, web flat on the bed, no service punch-outs (their size and spacing vary by maker). Table rows are the designations The Steel Network lists; other makers roll other combinations from the same system. The Steel Network supplies its JamStud in place of S350.
- Track (T sections) for these studs is a separate page: unlipped, with web = stud depth + 2t + R.
Cold-formed steel C-studs and joists (SSMA S sections): 162S125 to… size chart
| designation | depth in | flange in | lip in | mils | ref. gauge | design t in | inside R in | depth mm | flange mm | lip mm | t mm | R mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 162S125-18 | 1.625 | 1.25 | 0.188 | 18 | 25 | 0.0188 | 0.0844 | 41.3 | 31.75 | 4.78 | 0.478 | 2.144 |
| 162S125-27 | 1.625 | 1.25 | 0.188 | 27 | 22 | 0.0283 | 0.0796 | 41.3 | 31.75 | 4.78 | 0.719 | 2.022 |
| 162S125-30 | 1.625 | 1.25 | 0.188 | 30 | 20 drywall | 0.0312 | 0.0782 | 41.3 | 31.75 | 4.78 | 0.792 | 1.986 |
| 162S125-33 | 1.625 | 1.25 | 0.188 | 33 | 20 structural | 0.0346 | 0.0765 | 41.3 | 31.75 | 4.78 | 0.879 | 1.943 |
| 250S125-18 | 2.5 | 1.25 | 0.188 | 18 | 25 | 0.0188 | 0.0844 | 63.5 | 31.75 | 4.78 | 0.478 | 2.144 |
| 250S125-27 | 2.5 | 1.25 | 0.188 | 27 | 22 | 0.0283 | 0.0796 | 63.5 | 31.75 | 4.78 | 0.719 | 2.022 |
| 250S125-30 | 2.5 | 1.25 | 0.188 | 30 | 20 drywall | 0.0312 | 0.0782 | 63.5 | 31.75 | 4.78 | 0.792 | 1.986 |
| 250S125-33 | 2.5 | 1.25 | 0.188 | 33 | 20 structural | 0.0346 | 0.0765 | 63.5 | 31.75 | 4.78 | 0.879 | 1.943 |
| 250S125-43 | 2.5 | 1.25 | 0.188 | 43 | 18 | 0.0451 | 0.0712 | 63.5 | 31.75 | 4.78 | 1.146 | 1.808 |
| 250S125-54 | 2.5 | 1.25 | 0.188 | 54 | 16 | 0.0566 | 0.0849 | 63.5 | 31.75 | 4.78 | 1.438 | 2.156 |
| 250S125-68 | 2.5 | 1.25 | 0.188 | 68 | 14 | 0.0713 | 0.1070 | 63.5 | 31.75 | 4.78 | 1.811 | 2.718 |
| 350S125-18 | 3.5 | 1.25 | 0.188 | 18 | 25 | 0.0188 | 0.0844 | 88.9 | 31.75 | 4.78 | 0.478 | 2.144 |
| 350S125-27 | 3.5 | 1.25 | 0.188 | 27 | 22 | 0.0283 | 0.0796 | 88.9 | 31.75 | 4.78 | 0.719 | 2.022 |
| 350S125-30 | 3.5 | 1.25 | 0.188 | 30 | 20 drywall | 0.0312 | 0.0782 | 88.9 | 31.75 | 4.78 | 0.792 | 1.986 |
| 350S125-33 | 3.5 | 1.25 | 0.188 | 33 | 20 structural | 0.0346 | 0.0765 | 88.9 | 31.75 | 4.78 | 0.879 | 1.943 |
| 350S125-43 | 3.5 | 1.25 | 0.188 | 43 | 18 | 0.0451 | 0.0712 | 88.9 | 31.75 | 4.78 | 1.146 | 1.808 |
| 350S125-54 | 3.5 | 1.25 | 0.188 | 54 | 16 | 0.0566 | 0.0849 | 88.9 | 31.75 | 4.78 | 1.438 | 2.156 |
| 350S125-68 | 3.5 | 1.25 | 0.188 | 68 | 14 | 0.0713 | 0.1070 | 88.9 | 31.75 | 4.78 | 1.811 | 2.718 |
| 362S125-18 | 3.625 | 1.25 | 0.188 | 18 | 25 | 0.0188 | 0.0844 | 92.1 | 31.75 | 4.78 | 0.478 | 2.144 |
| 362S125-27 | 3.625 | 1.25 | 0.188 | 27 | 22 | 0.0283 | 0.0796 | 92.1 | 31.75 | 4.78 | 0.719 | 2.022 |
| 362S125-30 | 3.625 | 1.25 | 0.188 | 30 | 20 drywall | 0.0312 | 0.0782 | 92.1 | 31.75 | 4.78 | 0.792 | 1.986 |
| 362S125-33 | 3.625 | 1.25 | 0.188 | 33 | 20 structural | 0.0346 | 0.0765 | 92.1 | 31.75 | 4.78 | 0.879 | 1.943 |
| 362S125-43 | 3.625 | 1.25 | 0.188 | 43 | 18 | 0.0451 | 0.0712 | 92.1 | 31.75 | 4.78 | 1.146 | 1.808 |
| 362S125-54 | 3.625 | 1.25 | 0.188 | 54 | 16 | 0.0566 | 0.0849 | 92.1 | 31.75 | 4.78 | 1.438 | 2.156 |
| 362S125-68 | 3.625 | 1.25 | 0.188 | 68 | 14 | 0.0713 | 0.1070 | 92.1 | 31.75 | 4.78 | 1.811 | 2.718 |
| 400S125-18 | 4 | 1.25 | 0.188 | 18 | 25 | 0.0188 | 0.0844 | 101.6 | 31.75 | 4.78 | 0.478 | 2.144 |
| 400S125-27 | 4 | 1.25 | 0.188 | 27 | 22 | 0.0283 | 0.0796 | 101.6 | 31.75 | 4.78 | 0.719 | 2.022 |
| 400S125-30 | 4 | 1.25 | 0.188 | 30 | 20 drywall | 0.0312 | 0.0782 | 101.6 | 31.75 | 4.78 | 0.792 | 1.986 |
| 400S125-33 | 4 | 1.25 | 0.188 | 33 | 20 structural | 0.0346 | 0.0765 | 101.6 | 31.75 | 4.78 | 0.879 | 1.943 |
| 400S125-43 | 4 | 1.25 | 0.188 | 43 | 18 | 0.0451 | 0.0712 | 101.6 | 31.75 | 4.78 | 1.146 | 1.808 |
| 400S125-54 | 4 | 1.25 | 0.188 | 54 | 16 | 0.0566 | 0.0849 | 101.6 | 31.75 | 4.78 | 1.438 | 2.156 |
| 400S125-68 | 4 | 1.25 | 0.188 | 68 | 14 | 0.0713 | 0.1070 | 101.6 | 31.75 | 4.78 | 1.811 | 2.718 |
| 550S125-18 | 5.5 | 1.25 | 0.188 | 18 | 25 | 0.0188 | 0.0844 | 139.7 | 31.75 | 4.78 | 0.478 | 2.144 |
| 550S125-27 | 5.5 | 1.25 | 0.188 | 27 | 22 | 0.0283 | 0.0796 | 139.7 | 31.75 | 4.78 | 0.719 | 2.022 |
| 550S125-30 | 5.5 | 1.25 | 0.188 | 30 | 20 drywall | 0.0312 | 0.0782 | 139.7 | 31.75 | 4.78 | 0.792 | 1.986 |
| 550S125-33 | 5.5 | 1.25 | 0.188 | 33 | 20 structural | 0.0346 | 0.0765 | 139.7 | 31.75 | 4.78 | 0.879 | 1.943 |
| 550S125-43 | 5.5 | 1.25 | 0.188 | 43 | 18 | 0.0451 | 0.0712 | 139.7 | 31.75 | 4.78 | 1.146 | 1.808 |
| 550S125-54 | 5.5 | 1.25 | 0.188 | 54 | 16 | 0.0566 | 0.0849 | 139.7 | 31.75 | 4.78 | 1.438 | 2.156 |
| 550S125-68 | 5.5 | 1.25 | 0.188 | 68 | 14 | 0.0713 | 0.1070 | 139.7 | 31.75 | 4.78 | 1.811 | 2.718 |
| 600S125-18 | 6 | 1.25 | 0.188 | 18 | 25 | 0.0188 | 0.0844 | 152.4 | 31.75 | 4.78 | 0.478 | 2.144 |
| 600S125-27 | 6 | 1.25 | 0.188 | 27 | 22 | 0.0283 | 0.0796 | 152.4 | 31.75 | 4.78 | 0.719 | 2.022 |
| 600S125-30 | 6 | 1.25 | 0.188 | 30 | 20 drywall | 0.0312 | 0.0782 | 152.4 | 31.75 | 4.78 | 0.792 | 1.986 |
| 600S125-33 | 6 | 1.25 | 0.188 | 33 | 20 structural | 0.0346 | 0.0765 | 152.4 | 31.75 | 4.78 | 0.879 | 1.943 |
| 600S125-43 | 6 | 1.25 | 0.188 | 43 | 18 | 0.0451 | 0.0712 | 152.4 | 31.75 | 4.78 | 1.146 | 1.808 |
| 600S125-54 | 6 | 1.25 | 0.188 | 54 | 16 | 0.0566 | 0.0849 | 152.4 | 31.75 | 4.78 | 1.438 | 2.156 |
| 600S125-68 | 6 | 1.25 | 0.188 | 68 | 14 | 0.0713 | 0.1070 | 152.4 | 31.75 | 4.78 | 1.811 | 2.718 |
| 800S125-33 | 8 | 1.25 | 0.188 | 33 | 20 structural | 0.0346 | 0.0765 | 203.2 | 31.75 | 4.78 | 0.879 | 1.943 |
| 800S125-43 | 8 | 1.25 | 0.188 | 43 | 18 | 0.0451 | 0.0712 | 203.2 | 31.75 | 4.78 | 1.146 | 1.808 |
| 800S125-54 | 8 | 1.25 | 0.188 | 54 | 16 | 0.0566 | 0.0849 | 203.2 | 31.75 | 4.78 | 1.438 | 2.156 |
| 800S125-68 | 8 | 1.25 | 0.188 | 68 | 14 | 0.0713 | 0.1070 | 203.2 | 31.75 | 4.78 | 1.811 | 2.718 |
| 250S137-33 | 2.5 | 1.375 | 0.375 | 33 | 20 structural | 0.0346 | 0.0765 | 63.5 | 34.92 | 9.52 | 0.879 | 1.943 |
| 250S137-43 | 2.5 | 1.375 | 0.375 | 43 | 18 | 0.0451 | 0.0712 | 63.5 | 34.92 | 9.52 | 1.146 | 1.808 |
| 250S137-54 | 2.5 | 1.375 | 0.375 | 54 | 16 | 0.0566 | 0.0849 | 63.5 | 34.92 | 9.52 | 1.438 | 2.156 |
| 250S137-68 | 2.5 | 1.375 | 0.375 | 68 | 14 | 0.0713 | 0.1070 | 63.5 | 34.92 | 9.52 | 1.811 | 2.718 |
| 250S162-33 | 2.5 | 1.625 | 0.500 | 33 | 20 structural | 0.0346 | 0.0765 | 63.5 | 41.27 | 12.70 | 0.879 | 1.943 |
| 250S162-43 | 2.5 | 1.625 | 0.500 | 43 | 18 | 0.0451 | 0.0712 | 63.5 | 41.27 | 12.70 | 1.146 | 1.808 |
| 250S162-54 | 2.5 | 1.625 | 0.500 | 54 | 16 | 0.0566 | 0.0849 | 63.5 | 41.27 | 12.70 | 1.438 | 2.156 |
| 250S162-68 | 2.5 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 63.5 | 41.27 | 12.70 | 1.811 | 2.718 |
| 350S162-33 | 3.5 | 1.625 | 0.500 | 33 | 20 structural | 0.0346 | 0.0765 | 88.9 | 41.27 | 12.70 | 0.879 | 1.943 |
| 350S162-43 | 3.5 | 1.625 | 0.500 | 43 | 18 | 0.0451 | 0.0712 | 88.9 | 41.27 | 12.70 | 1.146 | 1.808 |
| 350S162-54 | 3.5 | 1.625 | 0.500 | 54 | 16 | 0.0566 | 0.0849 | 88.9 | 41.27 | 12.70 | 1.438 | 2.156 |
| 350S162-68 | 3.5 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 88.9 | 41.27 | 12.70 | 1.811 | 2.718 |
| 350S300-54 | 3.5 | 3 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 88.9 | 76.20 | 15.88 | 1.438 | 2.156 |
| 350S300-68 | 3.5 | 3 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 88.9 | 76.20 | 15.88 | 1.811 | 2.718 |
| 362S137-33 | 3.625 | 1.375 | 0.375 | 33 | 20 structural | 0.0346 | 0.0765 | 92.1 | 34.92 | 9.52 | 0.879 | 1.943 |
| 362S137-43 | 3.625 | 1.375 | 0.375 | 43 | 18 | 0.0451 | 0.0712 | 92.1 | 34.92 | 9.52 | 1.146 | 1.808 |
| 362S137-54 | 3.625 | 1.375 | 0.375 | 54 | 16 | 0.0566 | 0.0849 | 92.1 | 34.92 | 9.52 | 1.438 | 2.156 |
| 362S137-68 | 3.625 | 1.375 | 0.375 | 68 | 14 | 0.0713 | 0.1070 | 92.1 | 34.92 | 9.52 | 1.811 | 2.718 |
| 362S162-33 | 3.625 | 1.625 | 0.500 | 33 | 20 structural | 0.0346 | 0.0765 | 92.1 | 41.27 | 12.70 | 0.879 | 1.943 |
| 362S162-43 | 3.625 | 1.625 | 0.500 | 43 | 18 | 0.0451 | 0.0712 | 92.1 | 41.27 | 12.70 | 1.146 | 1.808 |
| 362S162-54 | 3.625 | 1.625 | 0.500 | 54 | 16 | 0.0566 | 0.0849 | 92.1 | 41.27 | 12.70 | 1.438 | 2.156 |
| 362S162-68 | 3.625 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 92.1 | 41.27 | 12.70 | 1.811 | 2.718 |
| 362S200-33 | 3.625 | 2 | 0.625 | 33 | 20 structural | 0.0346 | 0.0765 | 92.1 | 50.80 | 15.88 | 0.879 | 1.943 |
| 362S200-43 | 3.625 | 2 | 0.625 | 43 | 18 | 0.0451 | 0.0712 | 92.1 | 50.80 | 15.88 | 1.146 | 1.808 |
| 362S200-54 | 3.625 | 2 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 92.1 | 50.80 | 15.88 | 1.438 | 2.156 |
| 362S200-68 | 3.625 | 2 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 92.1 | 50.80 | 15.88 | 1.811 | 2.718 |
| 362S300-54 | 3.625 | 3 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 92.1 | 76.20 | 15.88 | 1.438 | 2.156 |
| 362S300-68 | 3.625 | 3 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 92.1 | 76.20 | 15.88 | 1.811 | 2.718 |
| 400S137-33 | 4 | 1.375 | 0.375 | 33 | 20 structural | 0.0346 | 0.0765 | 101.6 | 34.92 | 9.52 | 0.879 | 1.943 |
| 400S137-43 | 4 | 1.375 | 0.375 | 43 | 18 | 0.0451 | 0.0712 | 101.6 | 34.92 | 9.52 | 1.146 | 1.808 |
| 400S137-54 | 4 | 1.375 | 0.375 | 54 | 16 | 0.0566 | 0.0849 | 101.6 | 34.92 | 9.52 | 1.438 | 2.156 |
| 400S137-68 | 4 | 1.375 | 0.375 | 68 | 14 | 0.0713 | 0.1070 | 101.6 | 34.92 | 9.52 | 1.811 | 2.718 |
| 400S162-33 | 4 | 1.625 | 0.500 | 33 | 20 structural | 0.0346 | 0.0765 | 101.6 | 41.27 | 12.70 | 0.879 | 1.943 |
| 400S162-43 | 4 | 1.625 | 0.500 | 43 | 18 | 0.0451 | 0.0712 | 101.6 | 41.27 | 12.70 | 1.146 | 1.808 |
| 400S162-54 | 4 | 1.625 | 0.500 | 54 | 16 | 0.0566 | 0.0849 | 101.6 | 41.27 | 12.70 | 1.438 | 2.156 |
| 400S162-68 | 4 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 101.6 | 41.27 | 12.70 | 1.811 | 2.718 |
| 400S200-33 | 4 | 2 | 0.625 | 33 | 20 structural | 0.0346 | 0.0765 | 101.6 | 50.80 | 15.88 | 0.879 | 1.943 |
| 400S200-43 | 4 | 2 | 0.625 | 43 | 18 | 0.0451 | 0.0712 | 101.6 | 50.80 | 15.88 | 1.146 | 1.808 |
| 400S200-54 | 4 | 2 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 101.6 | 50.80 | 15.88 | 1.438 | 2.156 |
| 400S200-68 | 4 | 2 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 101.6 | 50.80 | 15.88 | 1.811 | 2.718 |
| 400S300-54 | 4 | 3 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 101.6 | 76.20 | 15.88 | 1.438 | 2.156 |
| 400S300-68 | 4 | 3 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 101.6 | 76.20 | 15.88 | 1.811 | 2.718 |
| 550S162-33 | 5.5 | 1.625 | 0.500 | 33 | 20 structural | 0.0346 | 0.0765 | 139.7 | 41.27 | 12.70 | 0.879 | 1.943 |
| 550S162-43 | 5.5 | 1.625 | 0.500 | 43 | 18 | 0.0451 | 0.0712 | 139.7 | 41.27 | 12.70 | 1.146 | 1.808 |
| 550S162-54 | 5.5 | 1.625 | 0.500 | 54 | 16 | 0.0566 | 0.0849 | 139.7 | 41.27 | 12.70 | 1.438 | 2.156 |
| 550S162-68 | 5.5 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 139.7 | 41.27 | 12.70 | 1.811 | 2.718 |
| 550S300-54 | 5.5 | 3 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 139.7 | 76.20 | 15.88 | 1.438 | 2.156 |
| 550S300-68 | 5.5 | 3 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 139.7 | 76.20 | 15.88 | 1.811 | 2.718 |
| 600S137-33 | 6 | 1.375 | 0.375 | 33 | 20 structural | 0.0346 | 0.0765 | 152.4 | 34.92 | 9.52 | 0.879 | 1.943 |
| 600S137-43 | 6 | 1.375 | 0.375 | 43 | 18 | 0.0451 | 0.0712 | 152.4 | 34.92 | 9.52 | 1.146 | 1.808 |
| 600S137-54 | 6 | 1.375 | 0.375 | 54 | 16 | 0.0566 | 0.0849 | 152.4 | 34.92 | 9.52 | 1.438 | 2.156 |
| 600S137-68 | 6 | 1.375 | 0.375 | 68 | 14 | 0.0713 | 0.1070 | 152.4 | 34.92 | 9.52 | 1.811 | 2.718 |
| 600S137-97 | 6 | 1.375 | 0.375 | 97 | 12 | 0.1017 | 0.1526 | 152.4 | 34.92 | 9.52 | 2.583 | 3.876 |
| 600S162-33 | 6 | 1.625 | 0.500 | 33 | 20 structural | 0.0346 | 0.0765 | 152.4 | 41.27 | 12.70 | 0.879 | 1.943 |
| 600S162-43 | 6 | 1.625 | 0.500 | 43 | 18 | 0.0451 | 0.0712 | 152.4 | 41.27 | 12.70 | 1.146 | 1.808 |
| 600S162-54 | 6 | 1.625 | 0.500 | 54 | 16 | 0.0566 | 0.0849 | 152.4 | 41.27 | 12.70 | 1.438 | 2.156 |
| 600S162-68 | 6 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 152.4 | 41.27 | 12.70 | 1.811 | 2.718 |
| 600S162-97 | 6 | 1.625 | 0.500 | 97 | 12 | 0.1017 | 0.1526 | 152.4 | 41.27 | 12.70 | 2.583 | 3.876 |
| 600S162-118 | 6 | 1.625 | 0.500 | 118 | 10 | 0.1242 | 0.1863 | 152.4 | 41.27 | 12.70 | 3.155 | 4.732 |
| 600S200-33 | 6 | 2 | 0.625 | 33 | 20 structural | 0.0346 | 0.0765 | 152.4 | 50.80 | 15.88 | 0.879 | 1.943 |
| 600S200-43 | 6 | 2 | 0.625 | 43 | 18 | 0.0451 | 0.0712 | 152.4 | 50.80 | 15.88 | 1.146 | 1.808 |
| 600S200-54 | 6 | 2 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 152.4 | 50.80 | 15.88 | 1.438 | 2.156 |
| 600S200-68 | 6 | 2 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 152.4 | 50.80 | 15.88 | 1.811 | 2.718 |
| 600S200-97 | 6 | 2 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 152.4 | 50.80 | 15.88 | 2.583 | 3.876 |
| 600S200-118 | 6 | 2 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 152.4 | 50.80 | 15.88 | 3.155 | 4.732 |
| 600S250-43 | 6 | 2.5 | 0.625 | 43 | 18 | 0.0451 | 0.0712 | 152.4 | 63.50 | 15.88 | 1.146 | 1.808 |
| 600S250-54 | 6 | 2.5 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 152.4 | 63.50 | 15.88 | 1.438 | 2.156 |
| 600S250-68 | 6 | 2.5 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 152.4 | 63.50 | 15.88 | 1.811 | 2.718 |
| 600S250-97 | 6 | 2.5 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 152.4 | 63.50 | 15.88 | 2.583 | 3.876 |
| 600S250-118 | 6 | 2.5 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 152.4 | 63.50 | 15.88 | 3.155 | 4.732 |
| 600S300-54 | 6 | 3 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 152.4 | 76.20 | 15.88 | 1.438 | 2.156 |
| 600S300-68 | 6 | 3 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 152.4 | 76.20 | 15.88 | 1.811 | 2.718 |
| 600S300-97 | 6 | 3 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 152.4 | 76.20 | 15.88 | 2.583 | 3.876 |
| 600S300-118 | 6 | 3 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 152.4 | 76.20 | 15.88 | 3.155 | 4.732 |
| 600S350-54 | 6 | 3.5 | 1.000 | 54 | 16 | 0.0566 | 0.0849 | 152.4 | 88.90 | 25.40 | 1.438 | 2.156 |
| 600S350-68 | 6 | 3.5 | 1.000 | 68 | 14 | 0.0713 | 0.1070 | 152.4 | 88.90 | 25.40 | 1.811 | 2.718 |
| 600S350-97 | 6 | 3.5 | 1.000 | 97 | 12 | 0.1017 | 0.1526 | 152.4 | 88.90 | 25.40 | 2.583 | 3.876 |
| 600S350-118 | 6 | 3.5 | 1.000 | 118 | 10 | 0.1242 | 0.1863 | 152.4 | 88.90 | 25.40 | 3.155 | 4.732 |
| 800S137-33 | 8 | 1.375 | 0.375 | 33 | 20 structural | 0.0346 | 0.0765 | 203.2 | 34.92 | 9.52 | 0.879 | 1.943 |
| 800S137-43 | 8 | 1.375 | 0.375 | 43 | 18 | 0.0451 | 0.0712 | 203.2 | 34.92 | 9.52 | 1.146 | 1.808 |
| 800S137-54 | 8 | 1.375 | 0.375 | 54 | 16 | 0.0566 | 0.0849 | 203.2 | 34.92 | 9.52 | 1.438 | 2.156 |
| 800S137-68 | 8 | 1.375 | 0.375 | 68 | 14 | 0.0713 | 0.1070 | 203.2 | 34.92 | 9.52 | 1.811 | 2.718 |
| 800S137-97 | 8 | 1.375 | 0.375 | 97 | 12 | 0.1017 | 0.1526 | 203.2 | 34.92 | 9.52 | 2.583 | 3.876 |
| 800S162-33 | 8 | 1.625 | 0.500 | 33 | 20 structural | 0.0346 | 0.0765 | 203.2 | 41.27 | 12.70 | 0.879 | 1.943 |
| 800S162-43 | 8 | 1.625 | 0.500 | 43 | 18 | 0.0451 | 0.0712 | 203.2 | 41.27 | 12.70 | 1.146 | 1.808 |
| 800S162-54 | 8 | 1.625 | 0.500 | 54 | 16 | 0.0566 | 0.0849 | 203.2 | 41.27 | 12.70 | 1.438 | 2.156 |
| 800S162-68 | 8 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 203.2 | 41.27 | 12.70 | 1.811 | 2.718 |
| 800S162-97 | 8 | 1.625 | 0.500 | 97 | 12 | 0.1017 | 0.1526 | 203.2 | 41.27 | 12.70 | 2.583 | 3.876 |
| 800S162-118 | 8 | 1.625 | 0.500 | 118 | 10 | 0.1242 | 0.1863 | 203.2 | 41.27 | 12.70 | 3.155 | 4.732 |
| 800S200-33 | 8 | 2 | 0.625 | 33 | 20 structural | 0.0346 | 0.0765 | 203.2 | 50.80 | 15.88 | 0.879 | 1.943 |
| 800S200-43 | 8 | 2 | 0.625 | 43 | 18 | 0.0451 | 0.0712 | 203.2 | 50.80 | 15.88 | 1.146 | 1.808 |
| 800S200-54 | 8 | 2 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 203.2 | 50.80 | 15.88 | 1.438 | 2.156 |
| 800S200-68 | 8 | 2 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 203.2 | 50.80 | 15.88 | 1.811 | 2.718 |
| 800S200-97 | 8 | 2 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 203.2 | 50.80 | 15.88 | 2.583 | 3.876 |
| 800S200-118 | 8 | 2 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 203.2 | 50.80 | 15.88 | 3.155 | 4.732 |
| 800S250-43 | 8 | 2.5 | 0.625 | 43 | 18 | 0.0451 | 0.0712 | 203.2 | 63.50 | 15.88 | 1.146 | 1.808 |
| 800S250-54 | 8 | 2.5 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 203.2 | 63.50 | 15.88 | 1.438 | 2.156 |
| 800S250-68 | 8 | 2.5 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 203.2 | 63.50 | 15.88 | 1.811 | 2.718 |
| 800S250-97 | 8 | 2.5 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 203.2 | 63.50 | 15.88 | 2.583 | 3.876 |
| 800S250-118 | 8 | 2.5 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 203.2 | 63.50 | 15.88 | 3.155 | 4.732 |
| 800S300-54 | 8 | 3 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 203.2 | 76.20 | 15.88 | 1.438 | 2.156 |
| 800S300-68 | 8 | 3 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 203.2 | 76.20 | 15.88 | 1.811 | 2.718 |
| 800S300-97 | 8 | 3 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 203.2 | 76.20 | 15.88 | 2.583 | 3.876 |
| 800S300-118 | 8 | 3 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 203.2 | 76.20 | 15.88 | 3.155 | 4.732 |
| 800S350-54 | 8 | 3.5 | 1.000 | 54 | 16 | 0.0566 | 0.0849 | 203.2 | 88.90 | 25.40 | 1.438 | 2.156 |
| 800S350-68 | 8 | 3.5 | 1.000 | 68 | 14 | 0.0713 | 0.1070 | 203.2 | 88.90 | 25.40 | 1.811 | 2.718 |
| 800S350-97 | 8 | 3.5 | 1.000 | 97 | 12 | 0.1017 | 0.1526 | 203.2 | 88.90 | 25.40 | 2.583 | 3.876 |
| 800S350-118 | 8 | 3.5 | 1.000 | 118 | 10 | 0.1242 | 0.1863 | 203.2 | 88.90 | 25.40 | 3.155 | 4.732 |
| 1000S162-43 | 10 | 1.625 | 0.500 | 43 | 18 | 0.0451 | 0.0712 | 254.0 | 41.27 | 12.70 | 1.146 | 1.808 |
| 1000S162-54 | 10 | 1.625 | 0.500 | 54 | 16 | 0.0566 | 0.0849 | 254.0 | 41.27 | 12.70 | 1.438 | 2.156 |
| 1000S162-68 | 10 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 254.0 | 41.27 | 12.70 | 1.811 | 2.718 |
| 1000S162-97 | 10 | 1.625 | 0.500 | 97 | 12 | 0.1017 | 0.1526 | 254.0 | 41.27 | 12.70 | 2.583 | 3.876 |
| 1000S162-118 | 10 | 1.625 | 0.500 | 118 | 10 | 0.1242 | 0.1863 | 254.0 | 41.27 | 12.70 | 3.155 | 4.732 |
| 1000S200-43 | 10 | 2 | 0.625 | 43 | 18 | 0.0451 | 0.0712 | 254.0 | 50.80 | 15.88 | 1.146 | 1.808 |
| 1000S200-54 | 10 | 2 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 254.0 | 50.80 | 15.88 | 1.438 | 2.156 |
| 1000S200-68 | 10 | 2 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 254.0 | 50.80 | 15.88 | 1.811 | 2.718 |
| 1000S200-97 | 10 | 2 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 254.0 | 50.80 | 15.88 | 2.583 | 3.876 |
| 1000S200-118 | 10 | 2 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 254.0 | 50.80 | 15.88 | 3.155 | 4.732 |
| 1000S250-43 | 10 | 2.5 | 0.625 | 43 | 18 | 0.0451 | 0.0712 | 254.0 | 63.50 | 15.88 | 1.146 | 1.808 |
| 1000S250-54 | 10 | 2.5 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 254.0 | 63.50 | 15.88 | 1.438 | 2.156 |
| 1000S250-68 | 10 | 2.5 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 254.0 | 63.50 | 15.88 | 1.811 | 2.718 |
| 1000S250-97 | 10 | 2.5 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 254.0 | 63.50 | 15.88 | 2.583 | 3.876 |
| 1000S250-118 | 10 | 2.5 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 254.0 | 63.50 | 15.88 | 3.155 | 4.732 |
| 1000S300-54 | 10 | 3 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 254.0 | 76.20 | 15.88 | 1.438 | 2.156 |
| 1000S300-68 | 10 | 3 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 254.0 | 76.20 | 15.88 | 1.811 | 2.718 |
| 1000S300-97 | 10 | 3 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 254.0 | 76.20 | 15.88 | 2.583 | 3.876 |
| 1000S300-118 | 10 | 3 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 254.0 | 76.20 | 15.88 | 3.155 | 4.732 |
| 1000S350-54 | 10 | 3.5 | 1.000 | 54 | 16 | 0.0566 | 0.0849 | 254.0 | 88.90 | 25.40 | 1.438 | 2.156 |
| 1000S350-68 | 10 | 3.5 | 1.000 | 68 | 14 | 0.0713 | 0.1070 | 254.0 | 88.90 | 25.40 | 1.811 | 2.718 |
| 1000S350-97 | 10 | 3.5 | 1.000 | 97 | 12 | 0.1017 | 0.1526 | 254.0 | 88.90 | 25.40 | 2.583 | 3.876 |
| 1000S350-118 | 10 | 3.5 | 1.000 | 118 | 10 | 0.1242 | 0.1863 | 254.0 | 88.90 | 25.40 | 3.155 | 4.732 |
| 1200S162-54 | 12 | 1.625 | 0.500 | 54 | 16 | 0.0566 | 0.0849 | 304.8 | 41.27 | 12.70 | 1.438 | 2.156 |
| 1200S162-68 | 12 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 304.8 | 41.27 | 12.70 | 1.811 | 2.718 |
| 1200S162-97 | 12 | 1.625 | 0.500 | 97 | 12 | 0.1017 | 0.1526 | 304.8 | 41.27 | 12.70 | 2.583 | 3.876 |
| 1200S162-118 | 12 | 1.625 | 0.500 | 118 | 10 | 0.1242 | 0.1863 | 304.8 | 41.27 | 12.70 | 3.155 | 4.732 |
| 1200S200-54 | 12 | 2 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 304.8 | 50.80 | 15.88 | 1.438 | 2.156 |
| 1200S200-68 | 12 | 2 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 304.8 | 50.80 | 15.88 | 1.811 | 2.718 |
| 1200S200-97 | 12 | 2 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 304.8 | 50.80 | 15.88 | 2.583 | 3.876 |
| 1200S200-118 | 12 | 2 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 304.8 | 50.80 | 15.88 | 3.155 | 4.732 |
| 1200S250-54 | 12 | 2.5 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 304.8 | 63.50 | 15.88 | 1.438 | 2.156 |
| 1200S250-68 | 12 | 2.5 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 304.8 | 63.50 | 15.88 | 1.811 | 2.718 |
| 1200S250-97 | 12 | 2.5 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 304.8 | 63.50 | 15.88 | 2.583 | 3.876 |
| 1200S250-118 | 12 | 2.5 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 304.8 | 63.50 | 15.88 | 3.155 | 4.732 |
| 1200S300-54 | 12 | 3 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 304.8 | 76.20 | 15.88 | 1.438 | 2.156 |
| 1200S300-68 | 12 | 3 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 304.8 | 76.20 | 15.88 | 1.811 | 2.718 |
| 1200S300-97 | 12 | 3 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 304.8 | 76.20 | 15.88 | 2.583 | 3.876 |
| 1200S300-118 | 12 | 3 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 304.8 | 76.20 | 15.88 | 3.155 | 4.732 |
| 1200S350-54 | 12 | 3.5 | 1.000 | 54 | 16 | 0.0566 | 0.0849 | 304.8 | 88.90 | 25.40 | 1.438 | 2.156 |
| 1200S350-68 | 12 | 3.5 | 1.000 | 68 | 14 | 0.0713 | 0.1070 | 304.8 | 88.90 | 25.40 | 1.811 | 2.718 |
| 1200S350-97 | 12 | 3.5 | 1.000 | 97 | 12 | 0.1017 | 0.1526 | 304.8 | 88.90 | 25.40 | 2.583 | 3.876 |
| 1200S350-118 | 12 | 3.5 | 1.000 | 118 | 10 | 0.1242 | 0.1863 | 304.8 | 88.90 | 25.40 | 3.155 | 4.732 |
| 1400S162-54 | 14 | 1.625 | 0.500 | 54 | 16 | 0.0566 | 0.0849 | 355.6 | 41.27 | 12.70 | 1.438 | 2.156 |
| 1400S162-68 | 14 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 355.6 | 41.27 | 12.70 | 1.811 | 2.718 |
| 1400S162-97 | 14 | 1.625 | 0.500 | 97 | 12 | 0.1017 | 0.1526 | 355.6 | 41.27 | 12.70 | 2.583 | 3.876 |
| 1400S162-118 | 14 | 1.625 | 0.500 | 118 | 10 | 0.1242 | 0.1863 | 355.6 | 41.27 | 12.70 | 3.155 | 4.732 |
| 1400S200-54 | 14 | 2 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 355.6 | 50.80 | 15.88 | 1.438 | 2.156 |
| 1400S200-68 | 14 | 2 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 355.6 | 50.80 | 15.88 | 1.811 | 2.718 |
| 1400S200-97 | 14 | 2 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 355.6 | 50.80 | 15.88 | 2.583 | 3.876 |
| 1400S200-118 | 14 | 2 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 355.6 | 50.80 | 15.88 | 3.155 | 4.732 |
| 1400S250-54 | 14 | 2.5 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 355.6 | 63.50 | 15.88 | 1.438 | 2.156 |
| 1400S250-68 | 14 | 2.5 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 355.6 | 63.50 | 15.88 | 1.811 | 2.718 |
| 1400S250-97 | 14 | 2.5 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 355.6 | 63.50 | 15.88 | 2.583 | 3.876 |
| 1400S250-118 | 14 | 2.5 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 355.6 | 63.50 | 15.88 | 3.155 | 4.732 |
| 1400S300-54 | 14 | 3 | 0.625 | 54 | 16 | 0.0566 | 0.0849 | 355.6 | 76.20 | 15.88 | 1.438 | 2.156 |
| 1400S300-68 | 14 | 3 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 355.6 | 76.20 | 15.88 | 1.811 | 2.718 |
| 1400S300-97 | 14 | 3 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 355.6 | 76.20 | 15.88 | 2.583 | 3.876 |
| 1400S300-118 | 14 | 3 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 355.6 | 76.20 | 15.88 | 3.155 | 4.732 |
| 1400S350-54 | 14 | 3.5 | 1.000 | 54 | 16 | 0.0566 | 0.0849 | 355.6 | 88.90 | 25.40 | 1.438 | 2.156 |
| 1400S350-68 | 14 | 3.5 | 1.000 | 68 | 14 | 0.0713 | 0.1070 | 355.6 | 88.90 | 25.40 | 1.811 | 2.718 |
| 1400S350-97 | 14 | 3.5 | 1.000 | 97 | 12 | 0.1017 | 0.1526 | 355.6 | 88.90 | 25.40 | 2.583 | 3.876 |
| 1400S350-118 | 14 | 3.5 | 1.000 | 118 | 10 | 0.1242 | 0.1863 | 355.6 | 88.90 | 25.40 | 3.155 | 4.732 |
| 1600S162-68 | 16 | 1.625 | 0.500 | 68 | 14 | 0.0713 | 0.1070 | 406.4 | 41.27 | 12.70 | 1.811 | 2.718 |
| 1600S162-97 | 16 | 1.625 | 0.500 | 97 | 12 | 0.1017 | 0.1526 | 406.4 | 41.27 | 12.70 | 2.583 | 3.876 |
| 1600S162-118 | 16 | 1.625 | 0.500 | 118 | 10 | 0.1242 | 0.1863 | 406.4 | 41.27 | 12.70 | 3.155 | 4.732 |
| 1600S200-68 | 16 | 2 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 406.4 | 50.80 | 15.88 | 1.811 | 2.718 |
| 1600S200-97 | 16 | 2 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 406.4 | 50.80 | 15.88 | 2.583 | 3.876 |
| 1600S200-118 | 16 | 2 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 406.4 | 50.80 | 15.88 | 3.155 | 4.732 |
| 1600S250-68 | 16 | 2.5 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 406.4 | 63.50 | 15.88 | 1.811 | 2.718 |
| 1600S250-97 | 16 | 2.5 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 406.4 | 63.50 | 15.88 | 2.583 | 3.876 |
| 1600S250-118 | 16 | 2.5 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 406.4 | 63.50 | 15.88 | 3.155 | 4.732 |
| 1600S300-68 | 16 | 3 | 0.625 | 68 | 14 | 0.0713 | 0.1070 | 406.4 | 76.20 | 15.88 | 1.811 | 2.718 |
| 1600S300-97 | 16 | 3 | 0.625 | 97 | 12 | 0.1017 | 0.1526 | 406.4 | 76.20 | 15.88 | 2.583 | 3.876 |
| 1600S300-118 | 16 | 3 | 0.625 | 118 | 10 | 0.1242 | 0.1863 | 406.4 | 76.20 | 15.88 | 3.155 | 4.732 |
| 1600S350-68 | 16 | 3.5 | 1.000 | 68 | 14 | 0.0713 | 0.1070 | 406.4 | 88.90 | 25.40 | 1.811 | 2.718 |
| 1600S350-97 | 16 | 3.5 | 1.000 | 97 | 12 | 0.1017 | 0.1526 | 406.4 | 88.90 | 25.40 | 2.583 | 3.876 |
| 1600S350-118 | 16 | 3.5 | 1.000 | 118 | 10 | 0.1242 | 0.1863 | 406.4 | 88.90 | 25.40 | 3.155 | 4.732 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| web (outside) | D (362S 92.08, 600S 152.40) | inside of the matching T track (D + R inside) | designed | all |
| flange face | B (S125 31.75, S162 41.28, S200 50.80) | gypsum board or sheathing, screw-fastened | designed | all |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Steel Framing Industry Association (SFIA) | Technical Guide for Cold-Formed Steel Framing Products (2026): stiffening lip, thickness and stud section property tables | web | Publisher's page; dimensions are facts |
| The Steel Network | Light Steel Framing Members (standard stud catalog): thickness, lip and designation tables | web | Publisher's page; dimensions are facts |
Free files
★ Free files 8 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
| ssma-162s125-18 | 162S125-18: web 1.625 in, flange 1.25 in, lip 0.188 in, t 0.0188 in, inside R 0.0844 in; 200 mm length | STEP · STL |
| ssma-362s125-30 | 362S125-30: web 3.625 in, flange 1.25 in, lip 0.188 in, t 0.0312 in, inside R 0.0782 in; 200 mm length | STEP · STL |
| ssma-362s162-33 | 362S162-33: web 3.625 in, flange 1.625 in, lip 0.500 in, t 0.0346 in, inside R 0.0765 in; 200 mm length | STEP · STL |
| ssma-362s162-54 | 362S162-54: web 3.625 in, flange 1.625 in, lip 0.500 in, t 0.0566 in, inside R 0.0849 in; 200 mm length | STEP · STL |
| ssma-600s162-54 | 600S162-54: web 6 in, flange 1.625 in, lip 0.500 in, t 0.0566 in, inside R 0.0849 in; 200 mm length | STEP · STL |
| ssma-600s200-68 | 600S200-68: web 6 in, flange 2 in, lip 0.625 in, t 0.0713 in, inside R 0.107 in; 200 mm length | STEP · STL |
| ssma-800s250-97 | 800S250-97: web 8 in, flange 2.5 in, lip 0.625 in, t 0.1017 in, inside R 0.1526 in; 200 mm length | STEP · STL |
| ssma-1000s300-118 | 1000S300-118: web 10 in, flange 3 in, lip 0.625 in, t 0.1242 in, inside R 0.1863 in; 200 mm length | STEP · STL |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=cold-formed-steel-studs-ssma
Fits with
Free
C channels (AISC American Standard channels): C6x13, C8x11.5, C12x20.7 dimensions + STEP/STL101.6 mm★ 19 filesFree
Strut channel, 1-5/8 in (Unistrut / B-Line): profile, lips, slots and hole patterns41.27 mm★ 10 filesFree
Plywood and drywall sheets: 4 × 8 ft at actual thickness (3/4 in plywood = 23/32 in)9 sizes★ 13 filesFree
Dimensional lumber: actual sizes of 1x2 to 6x6, 8 to 16 ft (2x4 = 1-1/2 × 3-1/2 in)17 sizes★ 72 filesFreeSelf-tapping (sheet metal) screws: ISO 7049 pan head ST2.2–ST6.3 and ASME B18.6.4 Type AB thread #2 to 3/820 sizes★ sheetFreeSheet metal gauge chart: steel, galvanized, stainless and aluminum (10, 12, 14, 16, 18, 20 gauge in inches and mm)36 sizes★ sheet
Questions
What does 362S162-54 mean?
3-5/8 in web, S = stud with lips, 1-5/8 in flange, 54 mil minimum thickness (16 ga, 0.0566 in design). Lip 1/2 in, inside bend radius 0.0849 in.
How thick is a 20 gauge steel stud?
Two kinds: 30 mil drywall (0.0312 in design) and 33 mil structural (0.0346 in design).
How big is the lip on a steel stud?
It follows the flange: 3/16 in on 1-1/4 in flanges, 3/8 on 1-3/8, 1/2 on 1-5/8, 5/8 on 2 to 3 in, 1 in on 3-1/2 in.
Are stud dimensions inside or outside?
Outside. Depth, flange and lip are out-to-out; the inside radius is listed separately.