Xem Studiomeasured geometryLibrary › Electronic components › Modules, sensors & displays ·
DFRobot Gravity IO Shield for FireBeetle 2 (DFR0762): 25.4 × 60 mm board and 4 mounting holes
What are the DFRobot DFR0762 FireBeetle 2 IO Shield dimensions and mounting-hole positions? · Modern device · basis: DFRobot's DFR0762 FireBeetle 2 IO expansion shield dimension drawing v1.0.
Also called: DFRobot DFR0762, DFR0762, Gravity IO Shield for FireBeetle 2, FireBeetle 2 IO expansion shield, dfrobot firebeetle 2 io shield, Gravity IO Shield for FireBeetle M0 and ESP32-E, dfrobot firebeetle 2
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- length
- 60.0 mm
- width
- 25.4 mm
- height
- 1.6 mm
Notes
- Board 60.0 × 25.4, 1.6 thick, centred; the FFC/GDI connector end and the VIN/GND terminal end are the two short edges.
- Four Ø2.0 mounting holes at (±11.0, ±28.3) from the board centre: 22.0 apart across, 56.6 apart along, 1.70 in from each short edge.
- The hole pattern matches the FireBeetle 2 board the shield stacks on.
- Modelled: board outline and holes. Not modelled: VIN/GND screw terminal, GDI FFC connector, Gravity pin headers and stacking headers.
- All dimensions are exact nominal millimetres, true size, with no tolerance added.
DFRobot Gravity IO Shield for FireBeetle 2 (DFR0762): 25.4 × 60 mm… size chart
| hole | x (mm) | y (mm) | diameter (mm) |
|---|---|---|---|
| 1 | -11.0 | -28.3 | 2.0 |
| 2 | +11.0 | -28.3 | 2.0 |
| 3 | -11.0 | +28.3 | 2.0 |
| 4 | +11.0 | +28.3 | 2.0 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| Mounting holes | 4 × Ø2.0 on 22.0 × 56.6 | M2 screws and standoffs, stacked over a FireBeetle 2 board | designed | all |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| DFRobot | Gravity: IO Shield for FireBeetle 2 (ESP32-E/M0) | web | Publisher's page; dimensions are facts |
| Mouser Electronics | DFRobot Gravity IO Shield for FireBeetle M0 & ESP32-E product overview (PDF) | web | Publisher's page; dimensions are facts |
Free files
★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
| dfrobot-firebeetle-2-io-shield-dfr0762 | DFRobot Gravity IO Shield for FireBeetle 2 (DFR0762): 25.4 × 60 mm board and 4 mounting holes | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=dfrobot-firebeetle-2-io-shield-dfr0762
Fits with
Questions
How big is the DFR0762 IO Shield?
60.0 × 25.4 mm with a 1.6 mm board.
What are the DFR0762 mounting holes?
Four Ø2.0 holes, 22.0 mm apart across and 56.6 mm apart along, 1.70 mm in from each short edge; the same pattern as the FireBeetle 2.