Xem Studiomeasured geometry

Library › Hardware › GT2 timing pulleys 18T to 60T: pitch and outside diameter, flange…

GT2 30T pulley for a 6 mm belt, bore Ø6

GT2 30T pulley for a 6 mm belt, bore Ø6: tooth section 7 wide (Misumi's belt-width block), flanges Ø24 (Misumi F) x 1 thick (example), PD 19.10, OD 18.59; approximate round-groove tooth form, no hub, no set screws

Exact dimensions. True size, no tolerance added. Threads are plain cylinders at the major diameter.

STEP STL free, CC BY 4.0 (credit "Xem Studio")

Dimensions

teeth30
pitch Ø PD, mm19.10
outside Ø OD, mm18.59
flange Ø F, mm24
bore range, mm (plain bore)5 to 11
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

From the full sheet

GT2 timing pulleys 18T to 60T: pitch and outside diameter, flange, bores 5 / 6 / 8 mm, 6 and 9 mm belts (+ 64 to 80T diameters): every size, notes, mating features and sources. What are the pitch diameter, outside diameter and flange size of a GT2 (2GT) timing pulley, and what bore does each tooth count come in?

Other sizes