Xem Studiomeasured geometry

Library › Hardware › Bearings, rails & motion ·

igus drylin RJ4JP-01-08 linear bearing: Ø8 bore, Ø15 × 24 mm and retaining-ring grooves

What are the igus drylin RJ4JP-01-08 dimensions and groove positions? · Modern device · basis: igus RJ4JP-01-08 product data (d, D, L, B, W, N).

Also called: igus RJ4JP-01-08, drylin R RJ4JP-01-08, iglidur RJ4JP-01-08, igus 8mm linear bearing, rj4jp-01-08 dimensions, igus lm8uu replacement

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
24.0 mm
width
15.0 mm
height
15.0 mm

Notes

  • Datum: axis on Z, centred on X and Y, one end face on z=0.
  • Bore Ø8.00 (+0/+0.04 per igus), outer Ø15.00, length 24.00.
  • Two retaining-ring grooves Ø14.30 × 1.10 wide; outer flanks 17.50 apart, symmetric: z=3.25..4.35 and 19.65..20.75.
  • Same outside dimensions as an LM8UU / drylin R ISO 10285 series bearing.
  • Exact nominal mm; outer-diameter tolerance is not published.

igus drylin RJ4JP-01-08 linear bearing: Ø8 bore, Ø15 × 24 mm and… size chart

dimensionvalue (mm)
d (bore)8.00
D (outer)15.00
L (length)24.00
B (groove span)17.50
W (groove width)1.10
N (groove Ø)14.30

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
BoreØ8.008 mm h-tolerance linear shaftrunall
Outer diameterØ15.00 × 24.00bearing seat in a housing or carriagepressall
GroovesØ14.30 × 1.10, 17.50 spanDIN 471 15 mm retaining ringsdesignedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

igusdrylin RJ4JP-01-08 product pagewebPublisher's page; dimensions are facts
HC MaschinentechnikRJ4JP-01-08 bearing dimensionswebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

igus-drylin-rj4jp-01-08igus drylin RJ4JP-01-08 linear bearing: Ø8 bore, Ø15 × 24 mm and retaining-ring groovesSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=igus-drylin-rj4jp-01-08

igus drylin RJ4JP-01-08 linear bearing: Ø8 bore, Ø15 × 24 mm and retaining-ring grooves, isometric render of a generated part
Render of igus-drylin-rj4jp-01-08 from the free STEP; not to scale.

Fits with

LM8UU linear bearing Ø8 × Ø15 × 24, isometric render of a generated part
LM8UU linear bearing Ø8 × Ø15 × 244 sizes★ 1 file
Linear shafts Ø3 to Ø25 mm (h6), 100 to 1000 mm long, isometric render of a generated part
Linear shafts Ø3 to Ø25 mm (h6), 100 to 1000 mm long10 sizes★ 70 files
length
Linear ball bushings LM..UU and LM..LUU (LM8UU, LM10UU, LM12UU, LM16UU, LM20UU, long LUU): bore, OD, length, ring-groove numbers30 sizes★ sheet
Retaining rings DIN 471 (external, for shafts): ring dimensions and groove diameter d2 × width m, 3 to 100 mm, isometric render of a generated part
Retaining rings DIN 471 (external, for shafts): ring dimensions and groove diameter d2 × width m, 3 to 100 mm56 sizes★ 11 files
Pillow block KP08 envelope with a 608 pocket, isometric render of a generated part
Pillow block KP08 envelope with a 608 pocket5 sizes★ 1 file

Questions

What size is the igus RJ4JP-01-08?

Ø8.00 bore, Ø15.00 outside, 24.00 long.

Is it the same size as an LM8UU?

Yes: Ø15 × 24 on an 8 mm shaft, with ring grooves Ø14.30 × 1.10 whose outer flanks are 17.50 apart.