Xem Studiomeasured geometry

Library › Tri-clamp & pipe › ISO 15552 pneumatic cylinder mounting, bore 32-100: rod thread KK…

mounting-pattern template for an ISO 15552 Ø63 cylinder end cap

mounting-pattern template for an ISO 15552 Ø63 cylinder end cap: 104.5 × 80.5 × 8 mm plate, four holes on the TG = 56.5 mm square drawn at the nominal major diameter of the end-cap thread M8 (Ø8; a through-hole for a bolt is a different size, open it for your fastener), one centre hole at the spigot B = Ø45 (d11 nominal). Plate size, thickness and corner radius are Xem choices

Exact dimensions. True size, no tolerance added. Threads are plain cylinders at the major diameter.

STEP STL free, CC BY 4.0 (credit "Xem Studio")

Dimensions

bore63
rod Ø MM20
rod thread KKM16×1.5
AM (rod thread length)32
spigot B (d11)45
TG (square hole pattern)56.5
RT (end-cap thread)M8
EE (port)G3/8
WH37
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

From the full sheet

ISO 15552 pneumatic cylinder mounting, bore 32-100: rod thread KK, rod Ø, TG hole pattern, RT thread, spigot B, port + 6 mounting templates: every size, notes, mating features and sources. What are the rod thread, mounting hole pattern (TG) and end-cap thread of an ISO 15552 (ISO 6431, VDMA 24562) 32, 40, 50, 63, 80 or 100 mm pneumatic cylinder?

Other sizes