Xem Studiomeasured geometryLibrary › Tools & garage › Bench & craft machines ·
Makita dust extractor hose sizes: 28 mm hose, 22 / 24 / 38 mm cuffs, 24 mm tool cuff
What are the hose and cuff sizes on Makita dust extractors (28 mm hose, 22, 24, 38 mm cuffs)? · Standard part · basis: Makita New Zealand accessory pages; retailer pages for the adapters (secondary)
Also called: makita vacuum hose diameter, makita 28 mm hose, makita 24 mm dust port, makita 38 mm cuff, makita front cuff 195546-0, makita vacuum adapter size
Exact dimensions. True size, with no printing tolerance added.
- sizes
- 6 in table
Notes
- Makita's distributor page for the 28 mm hose prints 'outside diameter' for the hose and lists three front cuffs (22, 24, 38). The unit is not printed next to 22, 24 and 38; they sit beside the 28 mm hose and the other rows (24 mm dust port), so mm is the reading, but it is not a printed unit.
- The cuff lengths, steps and wall are not published, so no file. The 24 mm x 34 mm front cuff is the only part that prints two diameters; which end is 24 and which is 34 is not stated.
- Only the numbers each source prints are listed, in the source's own words for what they measure. 'Nominal family' is the maker's own size label; it is not a measurement. Hose 'ID / OD' is the hose body, 'cuff / connection' is the end fitting, 'tool or accessory port' is the other side of an adapter. Inch figures are as printed; the mm in brackets are 25.4 mm per inch. A taper is listed only where a source prints it, and none does. Xem does not make these parts; measure your own hose before you size an adapter.
Makita dust extractor hose sizes: 28 mm hose, 22 / 24 / 38 mm cuffs… size chart
| item | nominal family | hose ID | hose OD | cuff / connection | tool or accessory port | taper | source |
|---|---|---|---|---|---|---|---|
| Hose 28mmx5m for VC013G / VC014G (1915G6-9) | 28 mm hose; cuffs 22, 24, 38 | not published | 28 mm outside diameter | front cuffs 22, 24 and 38 supplied (unit not printed on the page) | not published | not published | maker's distributor |
| Front cuff vacuum connector (195546-0) | 24 mm dust port | not published | not published | 24 mm x 34 mm (table); 'connection of a dust extractor to the 24mm dust port on Makita Tools' | 24 mm | not published | maker's distributor |
| Hose adapter 417307-1, '38 mm machine side' | 38 mm | not published | not published | internal diameter 45 / 38 mm | not published | not published | secondary |
| Tool cuff adapter 424379-9 | 24 mm cuff for 1 in hose | 1 in hose (25.4 mm) | not published | 24 mm connection; inlet 0.944882 in (24 mm) | 24 mm | not published | secondary |
| Vacuum wand adapter 191M79-1 | 1-1/4 in wand to 1-1/2 in accessories | not published | not published | not published | 1-1/4 in wand side; 1-1/2 in accessory side | not published | secondary |
| 32 mm x 1.7 m hose with front sleeve; 32 mm x 1 m (199453-9) | 32 mm | not published | not published | front sleeve (size not printed) | not published | not published | maker's distributor (title only) |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Makita New Zealand (maker's distributor) | Hose 28mm x 5m for VC013G and VC014G (1915G6-9): 28 mm outside diameter, front cuffs 22, 24, 38 | web | Publisher's page; dimensions are facts |
| Makita New Zealand (maker's distributor) | Front Cuff Vacuum Connector (195546-0): 24 mm x 34 mm | web | Publisher's page; dimensions are facts |
| Klium (retailer, secondary) | Makita 417307-1 hose adapter 38 mm machine side: internal diameter 45 / 38 mm | web | Publisher's page; dimensions are facts |
| Toolnut (retailer, secondary) | Makita 424379-9 tool cuff adapter, 24 mm for 1 in hose: connection 24 mm, inlet 0.944882 in | web | Publisher's page; dimensions are facts |
| The Home Depot (retailer, secondary) | Makita 1.25 in. to 1.5 in. Vacuum Wand Adapter (191M79-1) | web | Publisher's page; dimensions are facts |
Xem scan
File coming
No downloadable true-size file yet: the published figures do not fix the whole shape, and Xem never guesses a number. A measured scan is planned; request it and it moves up.
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=makita-dust-extractor-hose-sizes
Fits with
Questions
What size is a Makita dust extractor hose?
The distributor page for 1915G6-9 prints 28 mm outside diameter with front cuffs 22, 24 and 38.
What is the Makita tool dust port size?
24 mm per the front cuff 195546-0 page ('24mm dust port on Makita Tools') and the 424379-9 24 mm cuff adapter.