Xem Studiomeasured geometryLibrary › Electronics › Single-board computers · 2019 ·
Raspberry Pi 4 Model B
What are the Raspberry Pi 4 board dimensions and mounting-hole positions? · Modern device · basis: published mechanical drawing
- length
- 85 mm
- width
- 56 mm
- holes
- 4 × Ø2.7 mm · 58 x 49, 3.5 from each edge · M2.5
Notes
- Same 58 × 49 mm hole pattern as Pi 2/3/5; port layout differs from Pi 5 (USB-C power and two micro-HDMI on the long edge, USB/Ethernet on the short edge).
- Official STEP and PDF drawing available.
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Raspberry Pi Ltd (official) | Raspberry Pi 4 mechanical drawing (PDF) | CC BY-SA 4.0 (Raspberry Pi documentation) verify | |
| Raspberry Pi Ltd (official) | Raspberry Pi documentation: drawings and STEP | PDF, STEP | CC BY-SA 4.0 (Raspberry Pi documentation) verify |
Xem scan
Not planned The manufacturer publishes CAD; the sheet is here so an assistant can answer without opening a PDF.
Plain text: sheet.txt · JSON: /api/geometry?object=raspberry-pi-4-b
Questions
What are the Raspberry Pi 4 Model B dimensions in mm?
85 × 56 mm (length × width × height). Same 58 × 49 mm hole pattern as Pi 2/3/5; port layout differs from Pi 5 (USB-C power and two micro-HDMI on the long edge, USB/Ethernet on the short edge).
What is the Raspberry Pi 4 Model B mounting hole pattern?
4 × Ø2.7 mm on a 58 x 49, 3.5 from each edge mm pattern, M2.5 screws.
Where is the official CAD for the Raspberry Pi 4 Model B?
Raspberry Pi Ltd (official): Raspberry Pi 4 mechanical drawing (PDF) (PDF, CC BY-SA 4.0 (Raspberry Pi documentation)). Linked from the sheet; Xem Studio does not rehost it.