Xem StudioLibrary · Modern device
What are the Raspberry Pi 5 board dimensions and mounting-hole positions?
Raspberry Pi 5 — 85 × 56 mm. Basis: published mechanical drawing.
- length
- 85 mm
- width
- 56 mm
- holes
- 4 × Ø2.7 mm · 58 x 49, 3.5 from the long edge and 3.5 from the short edge · M2.5
Notes
- Same hole pattern as Pi 2/3/4.
- Ports: 2x USB 3, 2x USB 2, Ethernet on one short edge; 2x micro-HDMI, USB-C power on one long edge; 40-pin header opposite.
- Active cooler and the official case use the same four holes.
Plain text: sheet.txt · JSON: /api/geometry?object=raspberry-pi-5
Where the files are
Xem Studio does not host other publishers' files. Licenses are as stated by the publisher; "verify" means check at the link before commercial use.
| Raspberry Pi Ltd (official) | Raspberry Pi 5 mechanical drawing (PDF) | CC BY-SA 4.0 (Raspberry Pi documentation) verify | |
| Raspberry Pi Ltd (official) | Raspberry Pi documentation: mechanical drawings and STEP | PDF, STEP | CC BY-SA 4.0 verify |
Xem Studio scan
Not planned
The manufacturer publishes CAD; use that. The sheet above is here so an assistant can answer without opening a PDF.