Xem Studiomeasured geometry

Library › Electronics › Single-board computers · 2020 ·

Raspberry Pi Compute Module 4

What are the Compute Module 4 dimensions and mounting holes for a carrier board? · Modern device · basis: published datasheet drawing

length
55 mm
width
40 mm
holes
4 × Ø2.7 mm · 48 x 33 · M2.5

Notes

  • Four M2.5 holes; two 100-pin high-density connectors on the underside.
  • The official IO Board carries the full mechanical reference for a carrier design.

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Raspberry Pi Ltd (official)Compute Module 4 datasheetPDFCC BY-SA 4.0 (Raspberry Pi documentation) verify

Xem scan

Not planned The manufacturer publishes CAD; the sheet is here so an assistant can answer without opening a PDF.

Plain text: sheet.txt · JSON: /api/geometry?object=raspberry-pi-compute-module-4

length
Schematic, not to scale.

Fits with

Threaded standoffs, M2.5 and M3 (hex and round), isometric render of a generated part
Threaded standoffs, M2.5 and M3 (hex and round)2 sizes★ 16 files
length
Raspberry Pi 4 Model B85×56 mm★ free

Questions

What are the Raspberry Pi Compute Module 4 dimensions in mm?

55 × 40 mm (length × width × height). Four M2.5 holes; two 100-pin high-density connectors on the underside.

What is the Raspberry Pi Compute Module 4 mounting hole pattern?

4 × Ø2.7 mm on a 48 x 33 mm pattern, M2.5 screws.

Where is the official CAD for the Raspberry Pi Compute Module 4?

Raspberry Pi Ltd (official): Compute Module 4 datasheet (PDF, CC BY-SA 4.0 (Raspberry Pi documentation)). Linked from the sheet; Xem Studio does not rehost it.