Xem Studiomeasured geometryLibrary › Stirling engines › Drives & mechanisms ·
Rhombic drive upper yoke, 25.4 mm pivot span
What are the dimensions of the displacer yoke in a rhombic drive? · Hardware · basis: Yoke pivots at ±12.7 (rhombic kinematics, tools/rhombic_geom.py), pivot axes parallel to the gear shafts, rod axis across them; bore at the rod, M3 tap drill Ø2.5
Long Earth Society build part. The balanced beta drive for the 2 in tri-clamp engine; the rhombic frame head in the linkage fittings carries it on the spool. The engines
Exact dimensions. Every file is drawn at true size with no printing tolerance. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your printer's or process's clearance before making the part. Mating features
- sizes
- 6 in table
Notes
- The upper yoke of the rhombus: a 35.4 × 10 bar, 6 thick along the gear-shaft direction, with Ø3 pivot holes (fit: run) at ±12.7 running parallel to the gear shafts.
- A Ø11 × 16 boss on the rod axis (across the pivots) holds the Ø3 displacer rod (fit: slide), with an M3 grub (Ø2.5 tapped) entering at mid-height; an M3 × 4 grub sits flush.
- Both yokes sit in one plane on the rod axis, in front of the two link planes; the upper-yoke pivot pins are Ø3 × 12.
Sizes
| parameter | value |
|---|---|
| pivot span | 25.4 |
| bar | 35.4 × 10 × 6 |
| pivots | 2 × Ø3 (run), along the gear-shaft direction |
| boss | Ø11 × 16 |
| rod bore | Ø3 |
| grub hole | Ø2.5 (M3) |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance; leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| yoke pivots | Ø3 | Ø3 pins (turn on them) | run | yoke-* |
| yoke rod bore | Ø3 / Ø5 | displacer rod / 5 mm tube (M3 clamp) | slide | yoke-* |
| yoke clamp screw hole | Ø2.5 | M3 tap drill | designed | yoke-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Wikipedia | Rhombic drive | web | CC BY-SA 4.0 (text) |
| Wikipedia | Stirling engine | web | CC BY-SA 4.0 (text) |
| Philips Research / Meijer | The Philips Stirling engine (rhombic drive papers, 1958–1965) | web | reference verify |
| Long Earth Society | Engine builds | web, video | LES site |
Free files
★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
| yoke-upper-displacer | upper yoke: bar 35.4 × 10 × 6, Ø3 pivot holes 25.4 apart along the gear-shaft direction, Ø11 × 16 boss on the axis with the Ø3 displacer-rod bore and an M3 grub | STEP · STL |
Plain text: sheet.txt · JSON: /api/geometry?object=rhombic-upper-yoke
How it fits
Connects to
Crankshafts Ø3, Ø5 and Ø8 with full-length D-flatØ3 displacer rod clamped in the boss
Rhombic drive lower yoke, 25.4 mm pivot spanthe displacer rod runs on down through the lower yoke's tube
Rhombic drive link, 30 mm centrestwo links on the ±12.7 Ø3 pivotsAlso needed
Set screws, M3–M8M3 clamp screwIn these build lists
Beta Stirling, rhombic drive, 2 in tri-clampDisplacer and piston in one bore, driven by two counter-rotating gears on a rhom…You might also need
Questions
What does the upper yoke of a rhombic drive hold?
The Ø3 displacer rod, clamped by an M3 grub in its Ø11 boss; two links pivot on it at ±12.7.
Which way do the yoke pivot holes run?
Parallel to the gear shafts, across the rod: the links swing in planes square to the shafts.