Library › 3D printing › Snap fits & clips ·

3D printable snap-fit hooks and catches: cantilever latch, permanent or releasable, 4 sizes (STL, STEP)

What size should a 3D printed snap-fit hook be, and is there a ready hook and catch I can drop into my design? · Hardware · basis: Straight cantilever snap fit per the Bayer snap-fit design guide: peak strain ε = 1.5·t·y/L². Xem design, zero clearance.

Also called: 3d printable snap fit, snap fit latch stl, cantilever snap fit hook, releasable snap fit, snap fit catch, printable latch, snap clip cad

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
13.4 mm
width
16.0 mm
height
40.057 mm

Notes

  • Strain at full deflection: S 1.4 %, M 1.3 %, L 1.2 %, XL 1.2 %, under the ~2 % limit for PLA/PETG.
  • Permanent hooks have a 90° back face; releasable hooks a 45° back face. Lead-in 30° from vertical on all.
  • The catch ledge top sits at z = L with its edge at x = t: place the catch so it touches the hook beam.
  • Print the hook on its side so the beam bends within the layers. Add 0.1–0.2 mm clearance on the catch edge for FDM.

3D printable snap-fit hooks and catches: cantilever latch, permanent… size chart

fileL × t × w mmundercut y mmoverall mm
snap-hook-s-permanent10 × 1.2 × 60.810 × 10 × 14.886
snap-hook-s-releasable10 × 1.2 × 60.810 × 10 × 15.686
snap-catch-s10 × 1.2 × 6catch12 × 10 × 10
snap-hook-m-permanent15 × 1.6 × 81.210.8 × 12 × 20.578
snap-hook-m-releasable15 × 1.6 × 81.210.8 × 12 × 21.778
snap-catch-m15 × 1.6 × 8catch12 × 12 × 15
snap-hook-l-permanent20 × 2.0 × 101.611.6 × 14 × 26.271
snap-hook-l-releasable20 × 2.0 × 101.611.6 × 14 × 27.871
snap-catch-l20 × 2.0 × 10catch12 × 14 × 20
snap-hook-xl-permanent30 × 3.0 × 122.413.4 × 16 × 37.657
snap-hook-xl-releasable30 × 3.0 × 122.413.4 × 16 × 40.057
snap-catch-xl30 × 3.0 × 12catch12 × 16 × 30

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
hook head (undercut y)S 0.8 / M 1.2 / L 1.6 / XL 2.4 mmmatching snap catch or a ledge in your partslideall
base plate3 mm thick, w + 4 wideglue, screw or merge into your partdesignedhooks*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Bayer MaterialScienceSnap-Fit Joints for Plastics: A Design GuidewebPublisher's page; dimensions are facts
FictivHow to Design Snap Fit ComponentswebPublisher's page; dimensions are facts

Free files

★ Free files 12 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
snap-hook-s-permanentSnap-fit hook, small: beam 10 mm long × 1.2 mm thick × 6 mm wide, 0.8 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plateSTEP · STL
snap-hook-s-releasableSnap-fit hook, small: beam 10 mm long × 1.2 mm thick × 6 mm wide, 0.8 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plateSTEP · STL
snap-catch-sCatch for the small hook: ledge top at 10 mm, edge flush with the hook beam (zero clearance), 10 mm wideSTEP · STL
snap-hook-m-permanentSnap-fit hook, medium: beam 15 mm long × 1.6 mm thick × 8 mm wide, 1.2 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plateSTEP · STL
snap-hook-m-releasableSnap-fit hook, medium: beam 15 mm long × 1.6 mm thick × 8 mm wide, 1.2 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plateSTEP · STL
snap-catch-mCatch for the medium hook: ledge top at 15 mm, edge flush with the hook beam (zero clearance), 12 mm wideSTEP · STL
snap-hook-l-permanentSnap-fit hook, large: beam 20 mm long × 2.0 mm thick × 10 mm wide, 1.6 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plateSTEP · STL
snap-hook-l-releasableSnap-fit hook, large: beam 20 mm long × 2.0 mm thick × 10 mm wide, 1.6 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plateSTEP · STL
snap-catch-lCatch for the large hook: ledge top at 20 mm, edge flush with the hook beam (zero clearance), 14 mm wideSTEP · STL
snap-hook-xl-permanentSnap-fit hook, extra large: beam 30 mm long × 3.0 mm thick × 12 mm wide, 2.4 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plateSTEP · STL
snap-hook-xl-releasableSnap-fit hook, extra large: beam 30 mm long × 3.0 mm thick × 12 mm wide, 2.4 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plateSTEP · STL
snap-catch-xlCatch for the extra large hook: ledge top at 30 mm, edge flush with the hook beam (zero clearance), 16 mm wideSTEP · STL
Let your AI pull this. Claude: add Xem in one click. ChatGPT, Cursor or any MCP client: add https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=snap-fit-hooks-and-catches

3D printable snap-fit hooks and catches: cantilever latch, permanent or releasable, 4 sizes (STL, STEP), isometric render of a generated part
Render of snap-hook-l-releasable from the free STEP; not to scale.

Fits with

Questions

How big should a snap-fit undercut be for 3D printing?

Size it from the strain: ε = 1.5·t·y/L² for a straight beam. Keep ε under about 2% for PLA and PETG; these hooks sit at 1.2–1.4%.

Permanent or releasable snap fit?

Permanent has a 90° back face and will not pull out; releasable has a 45° back face and lets go under a firm pull.

Which way should I print a snap hook?

Lay the beam so it bends across the layers, not between them: print the hook on its side, beam flat on the bed, for the strongest flex.

How much clearance does a printed snap fit need?

These are zero clearance. Add about 0.1–0.2 mm on the catch edge for FDM.

Can I resize the hook?

Scale L, t and y together so 1.5·t·y/L² stays under 2%, and keep t at least 2–3 nozzle widths.