Library › 3D printing › Snap fits & clips ·

3D printable annular snap-fit caps and containers: push-on lid with bead and groove, 20–50 mm (STL, STEP)

How do I design a 3D printed lid that snaps onto a round container? · Hardware · basis: Annular snap joint per the Bayer snap-fit design guide; bead about 1.5–2 % of the diameter. Xem design, zero clearance.

Also called: 3d printable snap lid, snap on cap stl, annular snap fit cad, push fit lid 3d print, snap cap container

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
51.4 mm
width
51.4 mm
height
38.0 mm

Notes

  • Base: cup with 2 mm wall and 2 mm floor, rounded bead 3 mm below the rim.
  • Lid: 6 mm skirt with a matching inside groove, 2 mm top.
  • Print both open side up. Add 0.1–0.15 mm radial clearance for FDM.

3D printable annular snap-fit caps and containers: push-on lid with… size chart

fileneck D mmbead mmoverall mm
snap-cap-base-d20200.420.8 × 20.8 × 20
snap-cap-lid-d20200.424 × 24 × 8
snap-cap-base-d30300.531 × 31 × 26
snap-cap-lid-d30300.534 × 34 × 8
snap-cap-base-d40400.641.2 × 41.2 × 32
snap-cap-lid-d40400.644 × 44 × 8
snap-cap-base-d50500.751.4 × 51.4 × 38
snap-cap-lid-d50500.754 × 54 × 8

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
base beadD 20/30/40/50, bead 0.4/0.5/0.6/0.7 mmmatching lid grooveslideall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Bayer MaterialScienceSnap-Fit Joints for Plastics: A Design GuidewebPublisher's page; dimensions are facts
FictivHow to Design Snap Fit ComponentswebPublisher's page; dimensions are facts

Free files

★ Free files 8 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
snap-cap-base-d20Annular snap base, 20 mm neck: 20 mm tall, 2 mm wall, 0.4 mm bead 3 mm below the rimSTEP · STL
snap-cap-lid-d20Annular snap lid for the 20 mm base: matching 0.4 mm groove, 6 mm skirt, zero clearanceSTEP · STL
snap-cap-base-d30Annular snap base, 30 mm neck: 26 mm tall, 2 mm wall, 0.5 mm bead 3 mm below the rimSTEP · STL
snap-cap-lid-d30Annular snap lid for the 30 mm base: matching 0.5 mm groove, 6 mm skirt, zero clearanceSTEP · STL
snap-cap-base-d40Annular snap base, 40 mm neck: 32 mm tall, 2 mm wall, 0.6 mm bead 3 mm below the rimSTEP · STL
snap-cap-lid-d40Annular snap lid for the 40 mm base: matching 0.6 mm groove, 6 mm skirt, zero clearanceSTEP · STL
snap-cap-base-d50Annular snap base, 50 mm neck: 38 mm tall, 2 mm wall, 0.7 mm bead 3 mm below the rimSTEP · STL
snap-cap-lid-d50Annular snap lid for the 50 mm base: matching 0.7 mm groove, 6 mm skirt, zero clearanceSTEP · STL
Let your AI pull this. Claude: add Xem in one click. ChatGPT, Cursor or any MCP client: add https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=annular-snap-fit-caps

3D printable annular snap-fit caps and containers: push-on lid with bead and groove, 20–50 mm (STL, STEP), isometric render of a generated part
Render of snap-cap-base-d30 from the free STEP; not to scale.

Fits with

Questions

How big should the bead be on a printed snap lid?

About 1.5–2% of the diameter: 0.4 mm at 20 mm up to 0.7 mm at 50 mm. Larger beads crack the lid.

Why does my snap lid split?

The skirt must stretch over the bead. Keep the skirt wall thin (2 mm here) and print it with the layers running around the ring.

Does an annular snap seal?

It holds well but is not watertight; add an O-ring or gasket for liquid.

What clearance should I add?

These are zero clearance. Add about 0.1–0.15 mm radial for FDM.